On the mechanical plan, find equipment tag PMP-15; then read the equipment schedule. What voltage is shown?
Correct Answer
C) 240V
Sheet M-811 shows PMP-15 on the plan excerpt; the matching schedule row lists 240V in the Voltage column.
Why This Is the Correct Answer
Sheet M-811 shows PMP-15 on the plan excerpt; the matching schedule row lists 240V in the Voltage column.
Why the Other Options Are Wrong
Option A: 480V
480V is the voltage entry for RTU-12, not for the mark located on the plan.
Option B: 208V
208V is the voltage entry for EF-13, not for the mark located on the plan.
Option D: 120V
120V is the voltage entry for WH-14, not for the mark located on the plan.
Memory Technique
In mechanical and equipment 12, PMP-15 bridges plan to schedule; Voltage is the only cell to answer from.
Reference Hint
Open Sheet M-811; locate PMP-15 in the plan excerpt before reading the schedule row.
More NASCLA Questions
Bid instructions require bid security with each sealed bid. Which purpose should the estimator associate with that requirement?
A wood deck surface has 320 sf of coverage. Boards have a 5-1/2 in. actual face width, and the order includes an 8 percent cutting allowance. What linear footage is closest?
Using the dimensions shown for the stabilized construction entrance, what is the plan area?
A reroof area requires 14,720 sf of rigid insulation. Boards are 4 ft by 8 ft, and the order includes 5 percent waste. How many boards are needed?
Two addenda revise the drawings before bid day. What must a responsive bidder normally do with those addenda?
A utility trench is 180 ft long, 3 ft wide, and 7 ft deep with vertical sides inside a trench shield. What excavation volume is required?
A 120 ft long Type C trench is cut with a 4 ft bottom width and a 6 ft depth. If side slopes are 1-1/2 horizontal to 1 vertical, what excavation volume is closest?
A storm pipe run needs 240 ft of bedding, 4 ft wide and 6 in. thick. Including a 10 percent ordering allowance, how many cubic yards of bedding aggregate are needed?
A mass excavation produces 1,180 loose cubic yards of material for off-site disposal. End-dump trucks can haul 18 loose cubic yards per trip. What truck count is required?
An asphalt-shingle roof has a slope of 3:12. Under the IBC low-slope asphalt-shingle provisions, what underlayment arrangement is required?
People Also Study
Business & Financial Management
120 questions · 70% to pass
Contract Administration
60 questions · 70% to pass
Project Management
60 questions · 70% to pass
Related Study Resources
Previous Question
For a 6000 psi concrete mixture, the superintendent checks the low-test limit in the ACI acceptance criteria. Ignoring the three-test average for a moment, which individual test value is the minimum allowed by that branch?
Next Question
Why are steel deck side-lap attachments required?