In structural steel framing, what does camber mean?
Correct Answer
A) A deliberate upward curvature built into a beam or joist to offset expected deflection
Camber is an intentional upward curvature in a member so service-load deflection brings the member closer to the intended profile. Other choices describe coating, welding notation, or deck safety items.
Why This Is the Correct Answer
Camber is an intentional upward curvature in a member so service-load deflection brings the member closer to the intended profile. Other choices describe coating, welding notation, or deck safety items.
Why the Other Options Are Wrong
Option B: Classify the condition as a coating defect caused by mill scale
Choice B gives A coating defect caused by mill scale. Its specific error: it leaves out the controlling Camber result: A deliberate upward curvature built into a beam or joist to offset expected deflection.
Option C: Classify the condition as a weld symbol for a field weld, leaving camber unverified
Choice C (A weld symbol for a field weld) is rejected because the choice would not get the project to A deliberate upward curvature built into a beam or joist to offset expected deflection, which is the Camber result verified by the source.
Option D: Classify the condition as a temporary hole cover in metal deck
In metals work, A temporary hole cover in metal deck is the wrong selection for Camber: the option does not produce the required Camber outcome, A deliberate upward curvature built into a beam or joist to offset expected deflection.
Memory Technique
Use camber as the label and A deliberate upward curvature built into a beam or joist to offset expected deflection as the definition to recall under pressure.
Reference Hint
Open Principles and Practices of Commercial Construction, 11th Ed., 2024; use the index entry or section for "Structural steel member camber" to confirm that Camber is an intentional upward curvature in a member so service-load deflection brings the member closer to the intended profile.
More NASCLA Questions
Bid instructions require bid security with each sealed bid. Which purpose should the estimator associate with that requirement?
A wood deck surface has 320 sf of coverage. Boards have a 5-1/2 in. actual face width, and the order includes an 8 percent cutting allowance. What linear footage is closest?
Using the dimensions shown for the stabilized construction entrance, what is the plan area?
A reroof area requires 14,720 sf of rigid insulation. Boards are 4 ft by 8 ft, and the order includes 5 percent waste. How many boards are needed?
Two addenda revise the drawings before bid day. What must a responsive bidder normally do with those addenda?
A utility trench is 180 ft long, 3 ft wide, and 7 ft deep with vertical sides inside a trench shield. What excavation volume is required?
A 120 ft long Type C trench is cut with a 4 ft bottom width and a 6 ft depth. If side slopes are 1-1/2 horizontal to 1 vertical, what excavation volume is closest?
A storm pipe run needs 240 ft of bedding, 4 ft wide and 6 in. thick. Including a 10 percent ordering allowance, how many cubic yards of bedding aggregate are needed?
A mass excavation produces 1,180 loose cubic yards of material for off-site disposal. End-dump trucks can haul 18 loose cubic yards per trip. What truck count is required?
An asphalt-shingle roof has a slope of 3:12. Under the IBC low-slope asphalt-shingle provisions, what underlayment arrangement is required?
People Also Study
Business & Financial Management
120 questions · 70% to pass
Contract Administration
60 questions · 70% to pass
Project Management
60 questions · 70% to pass