From the area summary schedule, what occupancy is listed for Zone D?
Correct Answer
D) Assembly
Zone D is listed as Assembly.
Why This Is the Correct Answer
Zone D is listed as Assembly.
Why the Other Options Are Wrong
Option A: Mercantile
Mercantile skips the written authority, scope, price, notice, or release control needed for area summary lookup.
Option B: Storage
Storage skips the written authority, scope, price, notice, or release control needed for area summary lookup.
Option C: Business
Business skips the written authority, scope, price, notice, or release control needed for area summary lookup.
Memory Technique
Area Summary Lookup square for Plan Review: scope, authority, price, paper.
Reference Hint
Open-book path: turn to sheet G-101 in the plan packet, then use the AREA SUMMARY SCHEDULE note/table before checking P&P Commercial Construction plan-reading guidance.
More Project Mgmt Questions
The field condition is: the work should be released only if the team addresses that thermal movement must be accommodated. Which coping joint detail best matches the condition?
From the mechanical schedule, what CFM is listed for DOAS-2?
From panel schedule R1, what wire size is shown for circuit R1-5?
A subcontractor asks for direction after noting that the work should be released only if the team addresses that subgrade and aggregate must remain separated. Which geotextile selection best fits the work?
From the specialty item schedule, what height is listed for SP-3?
Using the drawing index, which sheet should you open for the entry wall footing plan?
From the plumbing fixture schedule, what waste size is listed for UR-1?
A Ocala task creates flying-particle exposure because a worker is cutting masonry. Which PPE control is required?
From the light fixture schedule, what mount is listed for L1?
From the loading strip dimension plan, what perimeter length is needed for edge restraint?
People Also Study
Business & Financial Management
120 questions · 70% to pass
Contract Administration
60 questions · 70% to pass
Related Study Resources
Previous Question
Before releasing the work, the team identifies this condition: the controlling field constraint is that a narrow vertical trench needs worker entry and cannot be laid back. Which excavation protection fits best?
Next Question
During the field-takeoff reconciliation at the school media-center infill, the slope-adjusted area for the metal roof panel order totals 17440 SF. With 12% waste, how many roofing squares are needed?