The field condition is: the work should be released only if the team addresses that thermal movement must be accommodated. Which coping joint detail best matches the condition?
Correct Answer
B) Coordinate movement-capable coping joints
movement-capable coping joints best matches the stated condition. The other choices are real construction options in the same family, but they fit different field conditions.
Why This Is the Correct Answer
movement-capable coping joints best matches the stated condition. The other choices are real construction options in the same family, but they fit different field conditions.
Why the Other Options Are Wrong
Option A: Coordinate continuous welded coping with no movement
Coordinate continuous welded coping with no movement relies on the wrong note, symbol, sheet, scale, or detail path for metal coping joints.
Option C: Coordinate sealant-only splice without slip joint
Coordinate sealant-only splice without slip joint relies on the wrong note, symbol, sheet, scale, or detail path for metal coping joints.
Option D: Coordinate rigid fasteners through both joint parts
Coordinate rigid fasteners through both joint parts relies on the wrong note, symbol, sheet, scale, or detail path for metal coping joints.
Memory Technique
One sheet points; the detail answers for Manager Checking.
Reference Hint
Open-book path: tab Principles and Practices of Commercial Construction, 10th Edition to Sheet metal methods; coping expansion and joint treatment; verify the construction method, material selection, equipment choice, or work sequence that fits the field condition.
More Project Mgmt Questions
From the mechanical schedule, what CFM is listed for DOAS-2?
From panel schedule R1, what wire size is shown for circuit R1-5?
A subcontractor asks for direction after noting that the work should be released only if the team addresses that subgrade and aggregate must remain separated. Which geotextile selection best fits the work?
From the specialty item schedule, what height is listed for SP-3?
Using the drawing index, which sheet should you open for the entry wall footing plan?
From the plumbing fixture schedule, what waste size is listed for UR-1?
A Ocala task creates flying-particle exposure because a worker is cutting masonry. Which PPE control is required?
From the light fixture schedule, what mount is listed for L1?
From the loading strip dimension plan, what perimeter length is needed for edge restraint?
For the crew-release check at the college lab corridor, the parapet return face measures 3590 SF before a 5% waste allowance. Each sheathing sheet covers 40 SF. How many sheets should be ordered?
People Also Study
Business & Financial Management
120 questions · 70% to pass
Contract Administration
60 questions · 70% to pass