From the light fixture schedule, what mount is listed for L1?
Correct Answer
D) Pendant
L1 is mounted as Pendant.
Why This Is the Correct Answer
L1 is mounted as Pendant.
Why the Other Options Are Wrong
Option A: Recessed
Recessed skips the written authority, scope, price, notice, or release control needed for light fixture schedule lookup.
Option B: Ceiling
Ceiling skips the written authority, scope, price, notice, or release control needed for light fixture schedule lookup.
Option C: Wall
Wall skips the written authority, scope, price, notice, or release control needed for light fixture schedule lookup.
Memory Technique
Retail Lighting shortcut is not a term until paper carries it.
Reference Hint
Open-book path: turn to sheet E-608 in the plan packet, then use the LIGHT FIXTURE SCHEDULE - RETAIL note/table before checking P&P Commercial Construction plan-reading guidance.
More Project Mgmt Questions
The field condition is: the work should be released only if the team addresses that thermal movement must be accommodated. Which coping joint detail best matches the condition?
From the mechanical schedule, what CFM is listed for DOAS-2?
From panel schedule R1, what wire size is shown for circuit R1-5?
A subcontractor asks for direction after noting that the work should be released only if the team addresses that subgrade and aggregate must remain separated. Which geotextile selection best fits the work?
From the specialty item schedule, what height is listed for SP-3?
Using the drawing index, which sheet should you open for the entry wall footing plan?
From the plumbing fixture schedule, what waste size is listed for UR-1?
A Ocala task creates flying-particle exposure because a worker is cutting masonry. Which PPE control is required?
From the loading strip dimension plan, what perimeter length is needed for edge restraint?
For the crew-release check at the college lab corridor, the parapet return face measures 3590 SF before a 5% waste allowance. Each sheathing sheet covers 40 SF. How many sheets should be ordered?
People Also Study
Business & Financial Management
120 questions · 70% to pass
Contract Administration
60 questions · 70% to pass
Related Study Resources
Previous Question
On this project, the controlling condition is the project condition shows that water pressure requires waterproofing. Which moisture-protection selection should be selected?
Next Question
While preparing the material-order review for the retail demising-wall phase, the slab strip is 138 ft long and saw-cut joints are placed at 5 ft on center, including one at the starting end. How many saw-cut joints are needed?