What does pipe bedding primarily provide?
Correct Answer
A) Uniform support and protection from point loads
Pipe bedding provides uniform support, helps maintain grade, and protects pipe from point loads.
Why This Is the Correct Answer
Pipe bedding provides uniform support, helps maintain grade, and protects pipe from point loads.
Why the Other Options Are Wrong
Option B: Base the pipe bedding support response on paint protection
The trap in B is Only paint protection. That selection is wrong because it leaves the work at an informal or incomplete stage, while Pipe bedding support requires Uniform support and protection from point loads; Pipe bedding provides uniform support and point-load protection.
Option C: Classify the condition as a way to reverse slope
Choice C gives A way to reverse slope. Its specific error: it points to A way to reverse slope, but.
Option D: Classify the condition as a substitute for testing
Choice D (A substitute for testing) is rejected because the option tries to substitute, waive, or delete the Pipe bedding support control; the item instead requires Uniform support and protection from point loads.
Memory Technique
Use a index tab memory cue for pipe bedding support: the stem's condition unlocks Uniform support and protection from point loads.
Reference Hint
Open Pipe and Excavation Contracting, 2011; use by topic index - bedding / backfill / compaction to confirm that Pipe bedding provides uniform support, helps maintain grade, and protects pipe from point loads.
More NASCLA Questions
Bid instructions require bid security with each sealed bid. Which purpose should the estimator associate with that requirement?
A wood deck surface has 320 sf of coverage. Boards have a 5-1/2 in. actual face width, and the order includes an 8 percent cutting allowance. What linear footage is closest?
Using the dimensions shown for the stabilized construction entrance, what is the plan area?
A reroof area requires 14,720 sf of rigid insulation. Boards are 4 ft by 8 ft, and the order includes 5 percent waste. How many boards are needed?
Two addenda revise the drawings before bid day. What must a responsive bidder normally do with those addenda?
A utility trench is 180 ft long, 3 ft wide, and 7 ft deep with vertical sides inside a trench shield. What excavation volume is required?
A 120 ft long Type C trench is cut with a 4 ft bottom width and a 6 ft depth. If side slopes are 1-1/2 horizontal to 1 vertical, what excavation volume is closest?
A storm pipe run needs 240 ft of bedding, 4 ft wide and 6 in. thick. Including a 10 percent ordering allowance, how many cubic yards of bedding aggregate are needed?
A mass excavation produces 1,180 loose cubic yards of material for off-site disposal. End-dump trucks can haul 18 loose cubic yards per trip. What truck count is required?
An asphalt-shingle roof has a slope of 3:12. Under the IBC low-slope asphalt-shingle provisions, what underlayment arrangement is required?
People Also Study
Business & Financial Management
120 questions · 70% to pass
Contract Administration
60 questions · 70% to pass
Project Management
60 questions · 70% to pass