What makes an insulating glass unit different from a single monolithic pane?
Correct Answer
B) It uses two or more panes separated by a sealed air or gas space
An insulating glass unit uses two or more panes separated by a sealed air or gas space to improve thermal performance. Other choices describe unrelated glass types or impossible installation conditions.
Why This Is the Correct Answer
An insulating glass unit uses two or more panes separated by a sealed air or gas space to improve thermal performance. Other choices describe unrelated glass types or impossible installation conditions.
Why the Other Options Are Wrong
Option A: Treat an insulating glass unit as always being wired glass
The trap in A is It is always wired glass. That selection is wrong because it answers the Insulating glass unit prompt with the wrong practical move.
Option C: Assume an insulating glass unit has no perimeter seal
Choice C (It has no perimeter seal) is rejected because the choice would not get the project to I.
Option D: Assume insulating glass unit can be installed without a frame
In doors, windows, and glazing, It can be installed without a frame is the wrong selection for Insulating glass unit: the action skips the timing, documentation, or field-control step needed for Insulating glass unit.
Memory Technique
Make insulating glass unit a purpose cue; if the choice changes the purpose, it cannot be It uses two or more panes separated by a sealed air or gas space.
Reference Hint
Open Principles and Practices of Commercial Construction, 11th Ed., 2024; use the index entry or section for "Insulating glass unit construction" to confirm that An insulating glass unit uses two or more panes separated by a sealed air or gas space to improve thermal performance.
More NASCLA Questions
Bid instructions require bid security with each sealed bid. Which purpose should the estimator associate with that requirement?
A wood deck surface has 320 sf of coverage. Boards have a 5-1/2 in. actual face width, and the order includes an 8 percent cutting allowance. What linear footage is closest?
Using the dimensions shown for the stabilized construction entrance, what is the plan area?
A reroof area requires 14,720 sf of rigid insulation. Boards are 4 ft by 8 ft, and the order includes 5 percent waste. How many boards are needed?
Two addenda revise the drawings before bid day. What must a responsive bidder normally do with those addenda?
A utility trench is 180 ft long, 3 ft wide, and 7 ft deep with vertical sides inside a trench shield. What excavation volume is required?
A 120 ft long Type C trench is cut with a 4 ft bottom width and a 6 ft depth. If side slopes are 1-1/2 horizontal to 1 vertical, what excavation volume is closest?
A storm pipe run needs 240 ft of bedding, 4 ft wide and 6 in. thick. Including a 10 percent ordering allowance, how many cubic yards of bedding aggregate are needed?
A mass excavation produces 1,180 loose cubic yards of material for off-site disposal. End-dump trucks can haul 18 loose cubic yards per trip. What truck count is required?
An asphalt-shingle roof has a slope of 3:12. Under the IBC low-slope asphalt-shingle provisions, what underlayment arrangement is required?
People Also Study
Business & Financial Management
120 questions · 70% to pass
Contract Administration
60 questions · 70% to pass
Project Management
60 questions · 70% to pass