For the buyout verification pass at the clinic oxygen-storage pad, the cricket infill zone measures 5865 SF before a 5% waste allowance. Each insulation board covers 32 SF. How many boards should be ordered?
Correct Answer
A) 193 boards
Order quantity equals area times waste factor divided by 32 SF coverage, rounded up.
Why This Is the Correct Answer
Order quantity equals area times waste factor divided by 32 SF coverage, rounded up.
Why the Other Options Are Wrong
Option B: 183 boards
183 boards is below the supported result for roof tapered insulation boards; it likely omits allowance, conversion, coverage, or final round-up.
Option C: 202 boards
202 boards is above the supported result for roof tapered insulation boards; it likely double-counts allowance, uses the wrong unit, or rounds too early.
Option D: 194 boards
194 boards is above the supported result for roof tapered insulation boards; it likely double-counts allowance, uses the wrong unit, or rounds too early.
Memory Technique
Measure to area, adjust for times, then let Estimator Checks set the finish line.
Reference Hint
Open-book path: tab Principles and Practices of Commercial Construction, 10th Edition to Roofing systems; board coverage and waste allowance; verify the construction method, material quantity, equipment use, unit conversion, or field-control calculation.
More Project Mgmt Questions
The field condition is: the work should be released only if the team addresses that thermal movement must be accommodated. Which coping joint detail best matches the condition?
From the mechanical schedule, what CFM is listed for DOAS-2?
From panel schedule R1, what wire size is shown for circuit R1-5?
A subcontractor asks for direction after noting that the work should be released only if the team addresses that subgrade and aggregate must remain separated. Which geotextile selection best fits the work?
From the specialty item schedule, what height is listed for SP-3?
Using the drawing index, which sheet should you open for the entry wall footing plan?
From the plumbing fixture schedule, what waste size is listed for UR-1?
A Ocala task creates flying-particle exposure because a worker is cutting masonry. Which PPE control is required?
From the light fixture schedule, what mount is listed for L1?
From the loading strip dimension plan, what perimeter length is needed for edge restraint?
People Also Study
Business & Financial Management
120 questions · 70% to pass
Contract Administration
60 questions · 70% to pass
Related Study Resources
Previous Question
For the look-ahead planning meeting at the storm-shelter entry vestibule, the #3 stirrup stock takeoff has 60 bars at 30 ft each. Using 0.376 lb per ft for stirrup fabrication, what reinforcing weight is estimated?
Next Question
At the marina restroom shell, during the material-order review, the paver delivery includes 105 pallets of palletized pavers. Each delivery truck carries 18 pallets. How many truckloads are required?