From panel schedule S1, what breaker is listed for S1-4?
Correct Answer
A) 30A/3P
S1-4 shows a 30A/3P breaker.
Why This Is the Correct Answer
S1-4 shows a 30A/3P breaker.
Why the Other Options Are Wrong
Option B: 20A/1P
20A/1P may relate to another site control, but it does not remove or guard the panel breaker lookup exposure being tested.
Option C: 15A/1P
15A/1P may relate to another site control, but it does not remove or guard the panel breaker lookup exposure being tested.
Option D: 40A/3P
40A/3P may relate to another site control, but it does not remove or guard the panel breaker lookup exposure being tested.
Memory Technique
Name the harm before the guard; schedule, listed cannot stand in for Site Electrical.
Reference Hint
Open-book path: turn to sheet E-609 in the plan packet, then use the PANEL S1 SCHEDULE note/table before checking P&P Commercial Construction plan-reading guidance.
More Project Mgmt Questions
The field condition is: the work should be released only if the team addresses that thermal movement must be accommodated. Which coping joint detail best matches the condition?
From the mechanical schedule, what CFM is listed for DOAS-2?
From panel schedule R1, what wire size is shown for circuit R1-5?
A subcontractor asks for direction after noting that the work should be released only if the team addresses that subgrade and aggregate must remain separated. Which geotextile selection best fits the work?
From the specialty item schedule, what height is listed for SP-3?
Using the drawing index, which sheet should you open for the entry wall footing plan?
From the plumbing fixture schedule, what waste size is listed for UR-1?
A Ocala task creates flying-particle exposure because a worker is cutting masonry. Which PPE control is required?
From the light fixture schedule, what mount is listed for L1?
From the loading strip dimension plan, what perimeter length is needed for edge restraint?
People Also Study
Business & Financial Management
120 questions · 70% to pass
Contract Administration
60 questions · 70% to pass
Related Study Resources
Previous Question
At the manufacturing clean-room chase, during the preconstruction estimate lock, the selective demolition debris produces 307 CY of debris volume, with 15% swell or handling allowance. Each container holds 30 CY. How many dumpsters are required?
Next Question
During the pre-installation review, the field issue is that the project condition shows that shrinkage cracking needs controlled relief. Which joint timing method is the best match?