From the room finish matrix, what accent finish is shown for L03?
Correct Answer
D) PL-1
L03 shows PL-1 in the Accent column.
Why This Is the Correct Answer
L03 shows PL-1 in the Accent column.
Why the Other Options Are Wrong
Option A: WD-1
WD-1 skips the written authority, scope, price, notice, or release control needed for finish matrix lookup.
Option B: PT-9
PT-9 skips the written authority, scope, price, notice, or release control needed for finish matrix lookup.
Option C: PT-1
PT-1 skips the written authority, scope, price, notice, or release control needed for finish matrix lookup.
Memory Technique
When shows clashes with pl-stated, let the contract speak before Hotel Lobby.
Reference Hint
Open-book path: turn to sheet A-705 in the plan packet, then use the ROOM FINISH MATRIX - HOTEL LOBBY note/table before checking P&P Commercial Construction plan-reading guidance.
More Project Mgmt Questions
The field condition is: the work should be released only if the team addresses that thermal movement must be accommodated. Which coping joint detail best matches the condition?
From the mechanical schedule, what CFM is listed for DOAS-2?
From panel schedule R1, what wire size is shown for circuit R1-5?
A subcontractor asks for direction after noting that the work should be released only if the team addresses that subgrade and aggregate must remain separated. Which geotextile selection best fits the work?
From the specialty item schedule, what height is listed for SP-3?
Using the drawing index, which sheet should you open for the entry wall footing plan?
From the plumbing fixture schedule, what waste size is listed for UR-1?
A Ocala task creates flying-particle exposure because a worker is cutting masonry. Which PPE control is required?
From the light fixture schedule, what mount is listed for L1?
From the loading strip dimension plan, what perimeter length is needed for edge restraint?
People Also Study
Business & Financial Management
120 questions · 70% to pass
Contract Administration
60 questions · 70% to pass
Related Study Resources
Previous Question
A Florida superintendent must choose the proper grout material because base plate needs load-bearing grout. Which option is best?
Next Question
While preparing the crew-release check for the campus maintenance annex, the #6 grade-beam bars takeoff has 129 bars at 32 ft each. Using 1.502 lb per ft for beam reinforcement, what reinforcing weight is estimated?