When should a hydronic piping pressure test be accepted?
Correct Answer
D) Before piping is concealed or insulated where inspection would be blocked
Pressure testing must be witnessed or accepted before concealment prevents inspection.
Why This Is the Correct Answer
Pressure testing must be witnessed or accepted before concealment prevents inspection.
Why the Other Options Are Wrong
Option A: Limit hydronic pressure test timing to after ceilings are closed only
Choice A gives Only after ceilings are closed. Its specific error: it tries to bypass the Hydronic pressure test timing checkpoint.
Option B: The MEP foreman should accept the pressure test only after final cleaning makes leaks easier to document
Choice B (Only after final cleaning) is rejected because it leaves the work at an informal or incomplete stage, while Hydronic pressure test timing requires Before piping is concealed or insulated where inspection would be blocked.
Option C: The MEP foreman should accept the pressure test after the warranty expires if no leaks appear
In mechanical and plumbing, After the warranty expires is the wrong selection for Hydronic pressure test timing: the choice would not get the project to Before piping is concealed or insulated where inspection would be blocked, which is the Hydronic pressure test timing result verified by the source.
Memory Technique
Use a index tab memory cue for hydronic pressure test timing: the stem's condition unlocks Before piping is concealed or insulated where inspection would be blocked.
Reference Hint
Open Mechanical and Electrical Systems for Construction Managers, 4th Ed., 2024; use by topic index - water weight / volume / pressure head to confirm that Pressure testing must be witnessed or accepted before concealment prevents inspection.
More NASCLA Questions
Bid instructions require bid security with each sealed bid. Which purpose should the estimator associate with that requirement?
A wood deck surface has 320 sf of coverage. Boards have a 5-1/2 in. actual face width, and the order includes an 8 percent cutting allowance. What linear footage is closest?
Using the dimensions shown for the stabilized construction entrance, what is the plan area?
A reroof area requires 14,720 sf of rigid insulation. Boards are 4 ft by 8 ft, and the order includes 5 percent waste. How many boards are needed?
Two addenda revise the drawings before bid day. What must a responsive bidder normally do with those addenda?
A utility trench is 180 ft long, 3 ft wide, and 7 ft deep with vertical sides inside a trench shield. What excavation volume is required?
A 120 ft long Type C trench is cut with a 4 ft bottom width and a 6 ft depth. If side slopes are 1-1/2 horizontal to 1 vertical, what excavation volume is closest?
A storm pipe run needs 240 ft of bedding, 4 ft wide and 6 in. thick. Including a 10 percent ordering allowance, how many cubic yards of bedding aggregate are needed?
A mass excavation produces 1,180 loose cubic yards of material for off-site disposal. End-dump trucks can haul 18 loose cubic yards per trip. What truck count is required?
An asphalt-shingle roof has a slope of 3:12. Under the IBC low-slope asphalt-shingle provisions, what underlayment arrangement is required?
People Also Study
Business & Financial Management
120 questions · 70% to pass
Contract Administration
60 questions · 70% to pass
Project Management
60 questions · 70% to pass