A subcontract omits a prime-contract safety requirement applicable to the subcontractor's work. What should the contractor correct?
Correct Answer
C) Flow down the applicable prime-contract requirement into the subcontract documents.
Applicable prime-contract obligations must be flowed down to lower-tier parties.
Why This Is the Correct Answer
Applicable prime-contract obligations must be flowed down to lower-tier parties.
Why the Other Options Are Wrong
Option A: Assume the subcontract flow-down requirement no longer applies
Choice A (Assume the requirement no longer applies.) is rejected because it answers the Subcontract flow-down conflict prompt with the wrong practical move.
Option B: The contractor should wait for final payment
In procurement and contracting, Wait for final payment. is the wrong selection for Subcontract flow-down conflict: the option delays or omits the controlling step.
Option D: The contractor should replace safety requirements with a bid tab
Choice D gives Replace safety requirements with a bid tab. Its specific error: the option tries to substitute, waive, or delete the Subcontract flow-down conflict control; the item instead requires Flow down the applicable prime-contract requirement into the subcontract documents.
Memory Technique
Tag the scene with subcontract flow-down conflict: wrong actor or wrong timing means the fix is not Flow down the applicable prime-contract requirement into the subcontract documents.
Reference Hint
Open NASCLA Contractors Guide to Business, Law and Project Management, 14th Ed.; use the index entry or section for "Subcontract flow-down" to confirm that Applicable prime-contract obligations must be flowed down to lower-tier parties.
More NASCLA Questions
Bid instructions require bid security with each sealed bid. Which purpose should the estimator associate with that requirement?
A wood deck surface has 320 sf of coverage. Boards have a 5-1/2 in. actual face width, and the order includes an 8 percent cutting allowance. What linear footage is closest?
Using the dimensions shown for the stabilized construction entrance, what is the plan area?
A reroof area requires 14,720 sf of rigid insulation. Boards are 4 ft by 8 ft, and the order includes 5 percent waste. How many boards are needed?
Two addenda revise the drawings before bid day. What must a responsive bidder normally do with those addenda?
A utility trench is 180 ft long, 3 ft wide, and 7 ft deep with vertical sides inside a trench shield. What excavation volume is required?
A 120 ft long Type C trench is cut with a 4 ft bottom width and a 6 ft depth. If side slopes are 1-1/2 horizontal to 1 vertical, what excavation volume is closest?
A storm pipe run needs 240 ft of bedding, 4 ft wide and 6 in. thick. Including a 10 percent ordering allowance, how many cubic yards of bedding aggregate are needed?
A mass excavation produces 1,180 loose cubic yards of material for off-site disposal. End-dump trucks can haul 18 loose cubic yards per trip. What truck count is required?
An asphalt-shingle roof has a slope of 3:12. Under the IBC low-slope asphalt-shingle provisions, what underlayment arrangement is required?
People Also Study
Business & Financial Management
120 questions · 70% to pass
Contract Administration
60 questions · 70% to pass
Project Management
60 questions · 70% to pass