The stormwater inspector walks the site and notes this item: what do O&M manuals provide at closeout?
Correct Answer
A) Operation, maintenance, parts, warranty, and manufacturer information
Operation, maintenance, parts, warranty, and manufacturer information is the controlling requirement: the distractors are related-looking contract or field terms, but they do not match the cited requirement for review item 176.
Why This Is the Correct Answer
Operation, maintenance, parts, warranty, and manufacturer information is the controlling requirement
Why the Other Options Are Wrong
Option B: Apply bid security percentage to the o&M manuals condition
Choice B gives Bid security percentage. Its specific error: the option answers a paperwork, payment, or bonding issue.
Option C: Base the o&M manuals response on subcontractor bid spread
Choice C (Subcontractor bid spread) is rejected because it shifts the question into contract administration money flow.
Option D: Base the o&M manuals response on soil proctor curve
In procurement and contracting, Soil proctor curve only is the wrong selection for O&M manuals: it tries to bypass the O&M manuals checkpoint.
Memory Technique
Treat O&M manuals like a labeled shelf; only the matching condition belongs with Operation, maintenance, parts, warranty, and manufacturer information.
Reference Hint
Open Construction Jobsite Management, 5th Ed.; use the index entry or section for "O&M manuals" to confirm that Operation, maintenance, parts, warranty, and manufacturer information is the controlling requirement
More NASCLA Questions
Bid instructions require bid security with each sealed bid. Which purpose should the estimator associate with that requirement?
A wood deck surface has 320 sf of coverage. Boards have a 5-1/2 in. actual face width, and the order includes an 8 percent cutting allowance. What linear footage is closest?
Using the dimensions shown for the stabilized construction entrance, what is the plan area?
A reroof area requires 14,720 sf of rigid insulation. Boards are 4 ft by 8 ft, and the order includes 5 percent waste. How many boards are needed?
Two addenda revise the drawings before bid day. What must a responsive bidder normally do with those addenda?
A utility trench is 180 ft long, 3 ft wide, and 7 ft deep with vertical sides inside a trench shield. What excavation volume is required?
A 120 ft long Type C trench is cut with a 4 ft bottom width and a 6 ft depth. If side slopes are 1-1/2 horizontal to 1 vertical, what excavation volume is closest?
A storm pipe run needs 240 ft of bedding, 4 ft wide and 6 in. thick. Including a 10 percent ordering allowance, how many cubic yards of bedding aggregate are needed?
A mass excavation produces 1,180 loose cubic yards of material for off-site disposal. End-dump trucks can haul 18 loose cubic yards per trip. What truck count is required?
An asphalt-shingle roof has a slope of 3:12. Under the IBC low-slope asphalt-shingle provisions, what underlayment arrangement is required?
People Also Study
Business & Financial Management
120 questions · 70% to pass
Contract Administration
60 questions · 70% to pass
Project Management
60 questions · 70% to pass