Before the procurement meeting closes, what does bidder responsibility primarily measure?
Correct Answer
D) Capability and qualifications to perform
Capability and qualifications to perform is the correct meaning of responsibility in this construction context for concept item 433. Other choices: the distractors describe unrelated administration, payment, or closeout ideas.
Why This Is the Correct Answer
Capability and qualifications to perform is the correct meaning of responsibility in this construction context for concept item 433.
Why the Other Options Are Wrong
Option A: Base the responsibility response on arithmetic
The trap in A is Arithmetic only. That selection is wrong because it leaves the work at an informal or incomplete stage, while Responsibility requires.
Option B: Select final lien release for responsibility
Choice B gives Final lien release. Its specific error: it answers the Responsibility prompt with the wrong practical move.
Option C: Select door hardware finish for responsibility
Choice C (Door hardware finish) is rejected because the option shifts to a different trade task.
Memory Technique
Make responsibility a purpose cue; if the choice changes the purpose, it cannot be Capability and qualifications to perform.
Reference Hint
Open Construction Project Management, 5th Ed. (2022); use the index entry or section for "Bidder responsibility" to confirm that Capability and qualifications to perform is the correct meaning of responsibility in this construction context for concept item 433.
More NASCLA Questions
Bid instructions require bid security with each sealed bid. Which purpose should the estimator associate with that requirement?
A wood deck surface has 320 sf of coverage. Boards have a 5-1/2 in. actual face width, and the order includes an 8 percent cutting allowance. What linear footage is closest?
Using the dimensions shown for the stabilized construction entrance, what is the plan area?
A reroof area requires 14,720 sf of rigid insulation. Boards are 4 ft by 8 ft, and the order includes 5 percent waste. How many boards are needed?
Two addenda revise the drawings before bid day. What must a responsive bidder normally do with those addenda?
A utility trench is 180 ft long, 3 ft wide, and 7 ft deep with vertical sides inside a trench shield. What excavation volume is required?
A 120 ft long Type C trench is cut with a 4 ft bottom width and a 6 ft depth. If side slopes are 1-1/2 horizontal to 1 vertical, what excavation volume is closest?
A storm pipe run needs 240 ft of bedding, 4 ft wide and 6 in. thick. Including a 10 percent ordering allowance, how many cubic yards of bedding aggregate are needed?
A mass excavation produces 1,180 loose cubic yards of material for off-site disposal. End-dump trucks can haul 18 loose cubic yards per trip. What truck count is required?
An asphalt-shingle roof has a slope of 3:12. Under the IBC low-slope asphalt-shingle provisions, what underlayment arrangement is required?
People Also Study
Business & Financial Management
120 questions · 70% to pass
Contract Administration
60 questions · 70% to pass
Project Management
60 questions · 70% to pass