Which general-requirements index entry is printed for the marked administrative drawing?
Correct Answer
B) RFI LOG
The general-requirements index row is labeled RFI LOG; the other options are separate administrative entries.
Why This Is the Correct Answer
The general-requirements index row is labeled RFI LOG; the other options are separate administrative entries.
Why the Other Options Are Wrong
Option A: SUBMITTAL LOG
SUBMITTAL LOG is another entry in the same index, not the marked row requested.
Option C: PERMIT SET
PERMIT SET is another entry in the same index, not the marked row requested.
Option D: CLOSEOUT INDEX
CLOSEOUT INDEX is another entry in the same index, not the marked row requested.
Memory Technique
Graphic ownership rule for administrative drawing index: one marker owns one label.
Reference Hint
Open Sheet G-864; read the marked row in the general-requirements index.
More NASCLA Questions
Bid instructions require bid security with each sealed bid. Which purpose should the estimator associate with that requirement?
A wood deck surface has 320 sf of coverage. Boards have a 5-1/2 in. actual face width, and the order includes an 8 percent cutting allowance. What linear footage is closest?
Using the dimensions shown for the stabilized construction entrance, what is the plan area?
A reroof area requires 14,720 sf of rigid insulation. Boards are 4 ft by 8 ft, and the order includes 5 percent waste. How many boards are needed?
Two addenda revise the drawings before bid day. What must a responsive bidder normally do with those addenda?
A utility trench is 180 ft long, 3 ft wide, and 7 ft deep with vertical sides inside a trench shield. What excavation volume is required?
A 120 ft long Type C trench is cut with a 4 ft bottom width and a 6 ft depth. If side slopes are 1-1/2 horizontal to 1 vertical, what excavation volume is closest?
A storm pipe run needs 240 ft of bedding, 4 ft wide and 6 in. thick. Including a 10 percent ordering allowance, how many cubic yards of bedding aggregate are needed?
A mass excavation produces 1,180 loose cubic yards of material for off-site disposal. End-dump trucks can haul 18 loose cubic yards per trip. What truck count is required?
An asphalt-shingle roof has a slope of 3:12. Under the IBC low-slope asphalt-shingle provisions, what underlayment arrangement is required?
People Also Study
Business & Financial Management
120 questions · 70% to pass
Contract Administration
60 questions · 70% to pass
Project Management
60 questions · 70% to pass
Related Study Resources
Previous Question
A concrete roof tile is proposed on a sloped canopy. What minimum slope is generally listed by the IBC for clay and concrete roof tile?
Next Question
Silt fence is needed on three sides of a 220 ft by 140 ft disturbed pad; the remaining 220 ft side is protected by a stabilized construction entrance. Adding 5 percent for overlaps and returns, what fence length should be ordered?