The Sanford project has this chemical communication issue: crew has not been briefed before using solvent. Which safety control should be completed?
Correct Answer
B) hazard communication briefing
Hazard communication controls include labels, SDS access, and worker instruction for chemical hazards.
Why This Is the Correct Answer
Hazard communication controls include labels, SDS access, and worker instruction for chemical hazards.
Why the Other Options Are Wrong
Option A: post the SDS, assume they read
post the SDS, assume they read may relate to another site control, but it does not remove or guard the hazard communication exposure being tested.
Option C: brief the lead to relay it
brief the lead to relay it may relate to another site control, but it does not remove or guard the hazard communication exposure being tested.
Option D: brief after the solvent is used
brief after the solvent is used may relate to another site control, but it does not remove or guard the hazard communication exposure being tested.
Memory Technique
Hazard lock for Safety Coordinator: controls is the harm, include is the guard.
Reference Hint
Open-book path: tab OSHA 29 CFR 1926 to Subpart D, 1926.59 Hazard communication; verify the OSHA safety threshold or jobsite control before answering.
More Project Mgmt Questions
The field condition is: the work should be released only if the team addresses that thermal movement must be accommodated. Which coping joint detail best matches the condition?
From the mechanical schedule, what CFM is listed for DOAS-2?
From panel schedule R1, what wire size is shown for circuit R1-5?
A subcontractor asks for direction after noting that the work should be released only if the team addresses that subgrade and aggregate must remain separated. Which geotextile selection best fits the work?
From the specialty item schedule, what height is listed for SP-3?
Using the drawing index, which sheet should you open for the entry wall footing plan?
From the plumbing fixture schedule, what waste size is listed for UR-1?
A Ocala task creates flying-particle exposure because a worker is cutting masonry. Which PPE control is required?
From the light fixture schedule, what mount is listed for L1?
From the loading strip dimension plan, what perimeter length is needed for edge restraint?
People Also Study
Business & Financial Management
120 questions · 70% to pass
Contract Administration
60 questions · 70% to pass
Related Study Resources
Previous Question
The foreman is preparing the next work area, and wood doors arrive before conditioning. Which storage method should be used?
Next Question
Before the inspection hold point, the team confirms that the project condition shows that exterior concrete faces wet exposure and freeze-thaw risk. Which concrete mix characteristic is appropriate?