For the field-takeoff reconciliation at the stormwater-lift-station yard, the CMU wall area for block filler is 16025 SF and requires 2 coats. At 110 SF per gallon, how many gallons are required?
Correct Answer
D) 292 gallons
Gallons equal area times coats divided by coverage, rounded up.
Why This Is the Correct Answer
Gallons equal area times coats divided by coverage, rounded up.
Why the Other Options Are Wrong
Option A: 146 gallons
146 gallons is below the supported result for block filler; it likely omits allowance, conversion, coverage, or final round-up.
Option B: 253 gallons
253 gallons is below the supported result for block filler; it likely omits allowance, conversion, coverage, or final round-up.
Option C: 295 gallons
295 gallons is above the supported result for block filler; it likely double-counts allowance, uses the wrong unit, or rounds too early.
Memory Technique
Finishes Superintendent takeoff: count the condition before counting the package.
Reference Hint
Open-book path: tab Principles and Practices of Commercial Construction, 10th Edition to Painting; porous masonry coverage; verify the construction method, material quantity, equipment use, unit conversion, or field-control calculation.
More Project Mgmt Questions
The field condition is: the work should be released only if the team addresses that thermal movement must be accommodated. Which coping joint detail best matches the condition?
From the mechanical schedule, what CFM is listed for DOAS-2?
From panel schedule R1, what wire size is shown for circuit R1-5?
A subcontractor asks for direction after noting that the work should be released only if the team addresses that subgrade and aggregate must remain separated. Which geotextile selection best fits the work?
From the specialty item schedule, what height is listed for SP-3?
Using the drawing index, which sheet should you open for the entry wall footing plan?
From the plumbing fixture schedule, what waste size is listed for UR-1?
A Ocala task creates flying-particle exposure because a worker is cutting masonry. Which PPE control is required?
From the light fixture schedule, what mount is listed for L1?
From the loading strip dimension plan, what perimeter length is needed for edge restraint?
People Also Study
Business & Financial Management
120 questions · 70% to pass
Contract Administration
60 questions · 70% to pass