For the upcoming operation, the key field fact is that the work should be released only if the team addresses that the concrete wall must hold a smooth radius. Which formwork system should govern the choice?
Correct Answer
C) Coordinate flexible or segmented radius formwork
flexible or segmented radius formwork best matches the stated condition. The other choices are real construction options in the same family, but they fit different field conditions.
Why This Is the Correct Answer
flexible or segmented radius formwork best matches the stated condition. The other choices are real construction options in the same family, but they fit different field conditions.
Why the Other Options Are Wrong
Option A: Coordinate straight gang wall forms
Coordinate straight gang wall forms addresses a neighboring field issue, but not the condition or method control required for curved wall formwork.
Option B: Coordinate square column forms
Coordinate square column forms addresses a neighboring field issue, but not the condition or method control required for curved wall formwork.
Option D: Field method: Coordinate one-sided flat wall forms
Field method: Coordinate one-sided flat wall forms addresses a neighboring field issue, but not the condition or method control required for curved wall formwork.
Memory Technique
Curved Wall Formwork method for Foreman Selecting: condition first, tool second.
Reference Hint
Open-book path: tab Principles and Practices of Commercial Construction, 10th Edition to Concrete formwork systems; curved and architectural cast-in-place work; verify the construction method, material selection, equipment choice, or work sequence that fits the field condition.
More Project Mgmt Questions
The field condition is: the work should be released only if the team addresses that thermal movement must be accommodated. Which coping joint detail best matches the condition?
From the mechanical schedule, what CFM is listed for DOAS-2?
From panel schedule R1, what wire size is shown for circuit R1-5?
A subcontractor asks for direction after noting that the work should be released only if the team addresses that subgrade and aggregate must remain separated. Which geotextile selection best fits the work?
From the specialty item schedule, what height is listed for SP-3?
Using the drawing index, which sheet should you open for the entry wall footing plan?
From the plumbing fixture schedule, what waste size is listed for UR-1?
A Ocala task creates flying-particle exposure because a worker is cutting masonry. Which PPE control is required?
From the light fixture schedule, what mount is listed for L1?
From the loading strip dimension plan, what perimeter length is needed for edge restraint?
People Also Study
Business & Financial Management
120 questions · 70% to pass
Contract Administration
60 questions · 70% to pass
Related Study Resources
Previous Question
At the performing-arts scene shop, during the buyout verification pass, the #3 stirrup stock takeoff has 33 bars at 34 ft each. Using 0.376 lb per ft for stirrup fabrication, what reinforcing weight is estimated?
Next Question
During the material-order review at the marina restroom shell, a rough-terrain forklift is needed for pallet staging for 13 days at $410 per day, plus a $85 delivery charge. What rental cost should be budgeted?