In detail 7/A-403, what material is called out at keynote 11?
Correct Answer
C) tapered insulation
The keynote list identifies 11 as tapered insulation.
Why This Is the Correct Answer
The keynote list identifies 11 as tapered insulation.
Why the Other Options Are Wrong
Option A: single-ply membrane
single-ply membrane may relate to another site control, but it does not remove or guard the roof detail keynote lookup exposure being tested.
Option B: cover board
cover board may relate to another site control, but it does not remove or guard the roof detail keynote lookup exposure being tested.
Option D: metal deck
metal deck may relate to another site control, but it does not remove or guard the roof detail keynote lookup exposure being tested.
Memory Technique
Name the harm before the guard; single-ply, membrane, cover cannot stand in for Edge Review.
Reference Hint
Open-book path: turn to sheet A-403 in the plan packet, then use the ROOF EDGE DETAIL note/table before checking P&P Commercial Construction plan-reading guidance.
More Project Mgmt Questions
The field condition is: the work should be released only if the team addresses that thermal movement must be accommodated. Which coping joint detail best matches the condition?
From the mechanical schedule, what CFM is listed for DOAS-2?
From panel schedule R1, what wire size is shown for circuit R1-5?
A subcontractor asks for direction after noting that the work should be released only if the team addresses that subgrade and aggregate must remain separated. Which geotextile selection best fits the work?
From the specialty item schedule, what height is listed for SP-3?
Using the drawing index, which sheet should you open for the entry wall footing plan?
From the plumbing fixture schedule, what waste size is listed for UR-1?
A Ocala task creates flying-particle exposure because a worker is cutting masonry. Which PPE control is required?
From the light fixture schedule, what mount is listed for L1?
From the loading strip dimension plan, what perimeter length is needed for edge restraint?
People Also Study
Business & Financial Management
120 questions · 70% to pass
Contract Administration
60 questions · 70% to pass
Related Study Resources
Previous Question
In the look-ahead meeting, the constraint is that the controlling field constraint is that wood doors arrive before conditioning. Which storage method should the project team carry?
Next Question
A subcontractor asks for direction after noting that the project condition shows that critical lighting and gloss paint will expose defects. Which finish-level coordination best fits the work?