Which inspection is typically required before pouring a concrete foundation?
Correct Answer
D) Footing and reinforcement inspection
A footing and reinforcement inspection must be completed and approved before concrete can be poured for the foundation. This ensures proper placement of reinforcing steel and compliance with structural requirements.
Why This Is the Correct Answer
The footing and reinforcement inspection is required before concrete can be poured because it verifies that the excavation is properly prepared, the reinforcing steel (rebar) is correctly placed and tied, and all structural elements meet code requirements. Once concrete is poured, these critical structural components become inaccessible for inspection. This inspection ensures the foundation will have the proper structural integrity and reinforcement placement as specified in the approved plans. The inspector must approve this inspection before any concrete placement can begin.
Why the Other Options Are Wrong
Option A: Foundation inspection
Final inspection occurs at the very end of construction when the entire project is complete and ready for occupancy. This is completely unrelated to foundation concrete pouring, which happens early in the construction process.
Option B: Final inspection
Foundation inspection is a general term that could refer to various foundation-related inspections, but it's not the specific inspection required immediately before concrete pouring. The more precise term is footing and reinforcement inspection.
Option C: Framing inspection
Framing inspection occurs much later in the construction process, after the foundation is complete and the wooden or steel frame structure is erected. This inspection has nothing to do with foundation concrete placement.
Memory Technique
Use the acronym 'FIRE' - Footing Inspection Required Early (before concrete pour). Remember that rebar is like the skeleton of the foundation - you must inspect the skeleton before covering it with concrete flesh.
Reference Hint
Florida Building Code, Chapter 18 - Soils and Foundations, or local building department inspection requirements and procedures manual
More Contract Admin Questions
A project experiences a 30-day delay due to unusually severe weather. The contract includes a liquidated damages clause of $1,000 per day for delays. If the weather delay is excusable but not compensable, what liquidated damages apply?
A commercial project requires a total of 12 inspections. The building department charges $85 per inspection for the first 5 inspections, $65 for inspections 6-10, and $45 for any additional inspections. What is the total inspection fee?
What document must be posted at the job site before a Certificate of Occupancy can be issued for a commercial building?
A mixed-use development requires a variance for reduced setbacks. The property is located within 500 feet of a hospital. What additional consideration must be addressed?
A LEED project requires tracking of regional materials. Materials are considered regional if they are extracted, harvested, or recovered, as well as manufactured within what distance of the project site?
An indemnification clause in a construction contract typically requires the contractor to:
A property owner wants to convert a single-family home into a duplex in an area zoned for single-family residential use. The conversion meets all building codes but violates density requirements. What approval is needed?
As-built drawings are typically required to be submitted:
AIA Document A401 is primarily used for:
A general contractor is building a 12,000 square foot commercial warehouse. The building permit fee is calculated at $8.50 per $1,000 of construction value. If the project value is $2,400,000, what is the building permit fee?
People Also Study
Business & Financial Management
120 questions · 70% to pass
Project Management
60 questions · 70% to pass
Related Study Resources
Previous Question
In a unit price contract, the contractor bids $125 per cubic yard for concrete placement. The original estimate was 400 cubic yards, but the actual quantity installed was 475 cubic yards. What is the total payment for concrete placement?
Next Question
When using the assemblies method for cost estimating, which level of project development is most appropriate?