A LEED project requires that 75% of construction waste be diverted from landfills. The project generated 240 tons of waste, and 185 tons were recycled or reused. Does this meet the LEED requirement?
Correct Answer
C) Yes, 77% was diverted which exceeds the 75% requirement
185 tons diverted ÷ 240 tons total = 0.77 or 77%. This exceeds the 75% LEED requirement for construction waste diversion from landfills.
Why This Is the Correct Answer
The calculation is straightforward: 185 tons diverted ÷ 240 tons total = 0.7708 or 77.08%. This rounds to 77%, which clearly exceeds the LEED requirement of 75% waste diversion from landfills. The project successfully meets the sustainability requirement by diverting more waste than the minimum threshold.
Why the Other Options Are Wrong
Option A: Yes, 180 tons exceeds the minimum requirement
The calculation method shown (diverted waste ÷ total waste × 100) is the correct standard method for determining waste diversion percentages in LEED projects. There is no error in the calculation methodology used.
Option B: No, only 73% was diverted which is below the 75% requirement
This option focuses on the absolute tonnage (180 tons) rather than the required percentage calculation. LEED requirements are based on percentages of total waste, not absolute tonnage amounts, making this reasoning fundamentally flawed.
Memory Technique
Remember 'Divide and Decide': Divide the diverted amount by total amount, then decide if it meets the percentage requirement. For LEED waste diversion, think '3/4 rule' - you need to divert at least 3 out of every 4 tons (75%).
Reference Hint
Look up LEED certification requirements and sustainable construction practices in the green building/environmental compliance section of your contractor reference manual.
More Contract Admin Questions
A project experiences a 30-day delay due to unusually severe weather. The contract includes a liquidated damages clause of $1,000 per day for delays. If the weather delay is excusable but not compensable, what liquidated damages apply?
A commercial project requires a total of 12 inspections. The building department charges $85 per inspection for the first 5 inspections, $65 for inspections 6-10, and $45 for any additional inspections. What is the total inspection fee?
What document must be posted at the job site before a Certificate of Occupancy can be issued for a commercial building?
A mixed-use development requires a variance for reduced setbacks. The property is located within 500 feet of a hospital. What additional consideration must be addressed?
A LEED project requires tracking of regional materials. Materials are considered regional if they are extracted, harvested, or recovered, as well as manufactured within what distance of the project site?
An indemnification clause in a construction contract typically requires the contractor to:
A property owner wants to convert a single-family home into a duplex in an area zoned for single-family residential use. The conversion meets all building codes but violates density requirements. What approval is needed?
As-built drawings are typically required to be submitted:
AIA Document A401 is primarily used for:
A general contractor is building a 12,000 square foot commercial warehouse. The building permit fee is calculated at $8.50 per $1,000 of construction value. If the project value is $2,400,000, what is the building permit fee?
People Also Study
Business & Financial Management
120 questions · 70% to pass
Project Management
60 questions · 70% to pass
Related Study Resources
Previous Question
A quality control inspection reveals that 15% of installed drywall joints fail to meet specification requirements. The total drywall area is 12,000 sq ft at $2.50 per sq ft installed. What is the cost impact of the rework?
Next Question
A project schedule shows Activity A (4 days) must finish before Activity B (6 days) can start, and Activity B must finish before Activity C (3 days) can start. If Activity A starts on Day 1, what is the earliest finish date for Activity C?