A shop plans to replace the compressor inside a certified recovery machine with a larger one taken from a different model, in order to speed up recovery on small appliances. What does that modification do to the machine's status?
Correct Answer
B) It ends the certification, because the machine no longer matches the design that was tested
A certification says that a particular design, built and assembled in a particular way, was tested and met the standard. Change the compressor and the machine in the shop is no longer that design. Nothing about the modification was tested, and there is no way to know whether the internal pressure relief, the oil separation, the controls and the vessel ratings still work together as they did. A shop that wants a faster machine buys one that was certified as being faster. Repairing a machine with the manufacturer's own replacement parts is a different matter entirely.
Why This Is the Correct Answer
Equipment certification attaches to the tested design. Substituting a component from another model produces a machine that has never been tested in that configuration, so the certification no longer describes what is standing on the shop floor. Whether the modification improves the recovery rate is beside the point: the certification is about verified performance and safe construction as a whole, not about speed alone.
Why the Other Options Are Wrong
Option A: Nothing, provided the replacement compressor is rated for the same refrigerants
Refrigerant compatibility is only one of several things the certification testing covers, and matching it does not restore a certification to a machine that has been rebuilt differently.
Option C: Nothing, provided the shop records the change in the machine's maintenance file
Recording a modification documents it honestly but does nothing to certify it. A maintenance file is not a substitute for testing by an approved organization.
Option D: It ends the certification only where the machine's rate falls below the tested figure
Certification is not a performance floor the shop may verify for itself. It is a statement about a tested design, and the design changed.
Memory Technique
Certified means tested. Rebuild it and nobody has tested it.
Reference Hint
Recovery equipment is certified as a tested design. Modifying it means the machine in front of you is no longer certified equipment.
More epa-608-type-1 Questions
An under-counter ice maker is one factory-sealed cabinet, while a modular ice machine head is joined to a remote condenser by field-run tubing. What certification does servicing the modular machine's circuit require?
A technician recovers refrigerant from a small appliance using a recovery machine that was manufactured in 1991. What recovery level must that older equipment achieve?
Two technicians recover from identical refrigerators with working compressors, one using a 1991 recovery machine and the other a 2015 machine. Why do their required recovery levels differ?
System-dependent recovery equipment may be used only on appliances that normally hold up to what amount of refrigerant?
What feature defines a self-contained recovery unit and sets it apart from the system-dependent kind?
When system-dependent recovery equipment is used on a small appliance whose compressor still runs, how can that working compressor be put to use?
Recovery from a small appliance has slowed down and the pressure is barely moving. What accepted technique helps drive the remaining refrigerant out?
After the recovery unit stops pulling on a small appliance, how does a technician confirm that the recovery is actually complete?
A sealed small appliance offers no service port at all. What has to happen before recovery equipment can be connected to it?
As refrigerant from a string of small appliances collects in a recovery cylinder, what fill limit applies to that cylinder?
People Also Study
Business & Financial Management
120 questions · 70% to pass
Contract Administration
60 questions · 70% to pass
Project Management
60 questions · 70% to pass