EstatePass
CaliforniaSafetyhard20% of exam part

According to Cal/OSHA Title 8, Section 1670, at what height must fall protection be provided for employees working on low-slope roofs?

Correct Answer

C) 15 feet

Cal/OSHA Section 1670 requires fall protection for employees on low-slope roofs when working 15 feet or more above lower levels, which differs from federal OSHA's 6-foot requirement.

Answer Options
A
10 feet
B
6 feet
C
15 feet
D
20 feet

Why This Is the Correct Answer

Option C is correct. Cal/OSHA Title 8, Section 1670 sets 15 feet as the trigger height for mandatory fall protection on low-slope roofs (slope ≤ 4:12). This is a California-specific requirement that differs significantly from federal OSHA's 6-foot standard for roofing operations under 29 CFR 1926.502.

Why the Other Options Are Wrong

Option A: 10 feet

Option A is incorrect. 10 feet is not the Cal/OSHA threshold for low-slope roofs. It is a commonly referenced height in other contexts (e.g., scaffolding requirements) but is not the correct answer for low-slope roof fall protection under Section 1670.

Option B: 6 feet

Option B is incorrect. 6 feet is the federal OSHA (29 CFR 1926.502) threshold for roofing fall protection. California operates under its own Cal/OSHA standards, which for low-slope roofs set a higher threshold of 15 feet. Confusing federal and state standards is the most common error on this question.

Option D: 20 feet

Option D is incorrect. 20 feet is not specified in Cal/OSHA Section 1670 for low-slope roofs. It exceeds the actual 15-foot requirement and would leave workers unprotected at heights between 15 and 20 feet.

Memory Technique

Remember: California gives workers on LOW-slope roofs more room — '15 for low, 6 for feds.' The number 15 is 2.5× the federal standard of 6, reflecting California's distinct approach to low-slope roofing hazards versus steep roofs.

Was this explanation helpful?

More California Questions

A construction site has employees working at heights of 12 feet above the ground on a steep-slope roof. According to Cal/OSHA fall protection requirements, what must be provided?

A construction crew is working outdoors in Fresno when the temperature reaches 97°F. Under Cal/OSHA heat illness prevention requirements, what is the minimum frequency for providing preventive cool-down rest periods?

A contractor is renovating a building built in 1975 and discovers material suspected to contain asbestos. According to Cal/OSHA regulations, what is the first required action?

Under Cal/OSHA regulations, what is the minimum frequency for reviewing and updating an Injury and Illness Prevention Program (IIPP)?

Calculate the minimum shade area required for 8 construction workers during a heat illness prevention cool-down period in California:

An employee working with lead-based paint removal has a blood lead level of 45 μg/dl. According to Cal/OSHA lead standards, what action must the employer take?

An IIPP must include procedures for investigating workplace accidents. According to Cal/OSHA, who is responsible for conducting these investigations?

A competent person inspecting a trench notices water seepage and minor soil movement. Under Cal/OSHA excavation standards, what action is required?

Calculate the required air changes per hour for a confined space with lead work under Cal/OSHA regulations. The space volume is 1,200 cubic feet and the exhaust fan moves 400 CFM. How many air changes per hour are being provided?

A roofing contractor is installing fall protection on a commercial building. Under Cal/OSHA Title 8, Section 1710, at what height does fall protection become mandatory for construction work?

People Also Study

Related Study Resources

Practice More Contractor Exam Questions

Access all practice questions with progress tracking and adaptive difficulty to pass your contractor license exam.

Start Practicing

Disclaimer: EstatePass is an independent exam preparation platform and is not affiliated with, endorsed by, or connected to any state contractor licensing board, the Construction Industry Licensing Board (CILB), the Department of Business and Professional Regulation (DBPR), NASCLA, Pearson VUE, PSI, or any government agency. Exam requirements, fees, and regulations change frequently. Always verify current requirements with your state's licensing board before making decisions. Information shown was last verified on the dates indicated and may not reflect the most recent changes.