A recycling center recovers refrigerant from household appliances only so the cabinets can be scrapped, and none of what it collects will ever be reused. What does that mean for the recovery equipment the site uses?
Correct Answer
D) It must use certified recovery equipment, exactly as a repair shop would have to
The equipment requirements follow the act of recovery, not the destination of the refrigerant. A recycling center recovering from small appliances is doing the same regulated activity a service shop does, so it needs certified recovery equipment and technicians certified for the appliances it handles. What happens afterward, whether the refrigerant is reclaimed, reused or destroyed, changes nothing. The one thing that is never acceptable is a vacuum pump, which does not capture refrigerant at all but discharges it into the room.
Why This Is the Correct Answer
Recovery equipment requirements attach to recovering refrigerant from an appliance, regardless of what the refrigerant is destined for. A recycling operation is recovering, so it uses certified equipment operated by certified technicians, and it recovers to the same levels a repair shop would. The fate of the refrigerant afterward is a separate question that does not relax any of that.
Why the Other Options Are Wrong
Option A: It may use uncertified equipment, since the refrigerant is not going back into service
Certification of equipment has nothing to do with whether the refrigerant will be reused. It is about capturing the charge properly in the first place.
Option B: It may use a vacuum pump, since disposal does not call for the refrigerant to be kept
A vacuum pump discharges to atmosphere. Using one in place of a recovery machine releases the entire charge, which is precisely the outcome the rules exist to prevent.
Option C: It must use equipment certified for other than small appliances, given the volume
Small appliances are handled with equipment certified for small appliances or with equipment certified for other appliances. Volume of work does not change which categories are acceptable.
Memory Technique
Recovery is recovery. Where it goes next is a different question entirely.
Reference Hint
Recovery from small appliances requires certified recovery equipment whatever the refrigerant's eventual fate. Vacuum pumps are never recovery equipment.
More epa-608-type-1 Questions
An under-counter ice maker is one factory-sealed cabinet, while a modular ice machine head is joined to a remote condenser by field-run tubing. What certification does servicing the modular machine's circuit require?
A technician recovers refrigerant from a small appliance using a recovery machine that was manufactured in 1991. What recovery level must that older equipment achieve?
Two technicians recover from identical refrigerators with working compressors, one using a 1991 recovery machine and the other a 2015 machine. Why do their required recovery levels differ?
System-dependent recovery equipment may be used only on appliances that normally hold up to what amount of refrigerant?
What feature defines a self-contained recovery unit and sets it apart from the system-dependent kind?
When system-dependent recovery equipment is used on a small appliance whose compressor still runs, how can that working compressor be put to use?
Recovery from a small appliance has slowed down and the pressure is barely moving. What accepted technique helps drive the remaining refrigerant out?
After the recovery unit stops pulling on a small appliance, how does a technician confirm that the recovery is actually complete?
A sealed small appliance offers no service port at all. What has to happen before recovery equipment can be connected to it?
As refrigerant from a string of small appliances collects in a recovery cylinder, what fill limit applies to that cylinder?
People Also Study
Business & Financial Management
120 questions · 70% to pass
Contract Administration
60 questions · 70% to pass
Project Management
60 questions · 70% to pass
Related Study Resources
Previous Question
A hermetic compressor has been cut out of a small appliance after the charge was recovered to the required level, and it is going into the shop's scrap metal bin. What should the technician bear in mind about that shell?
Next Question
A refrigerant leak in a small closed basement room creates what hazard for anyone working in that space?