Where does the Section 608 program expect a certified technician's certification record to be available for inspection?
Correct Answer
B) On file at the technician's place of business, with the technician also able to show proof
Employers are expected to keep a copy of each certified technician's credential at the place of business so it can be produced when an inspector asks. Technicians in turn carry proof of certification, usually a wallet card, and show it when buying refrigerant or when asked on a job. There is no requirement to file certificates with a regional office, to post them at job sites, or to staple them to purchase invoices.
Why This Is the Correct Answer
The place of business is where the records live. An employer keeps a copy of each certified technician's certificate on file for inspection, and the technician carries a card as personal proof. That arrangement covers both the enforcement check at the shop and the verification at the parts counter.
Why the Other Options Are Wrong
Option A: Filed with the EPA regional office that administers the certifying program that serves the region
Certificates are issued by approved certifying programs, and no rule requires filing an individual credential with a regional office. The record obligation sits with the employer instead.
Option C: Posted publicly at every job site where refrigerant work is being performed that day
Nothing requires public posting at a job site. The requirement is that the record be available for inspection at the place of business, not displayed wherever the technician is working.
Option D: Attached to each refrigerant purchase invoice held by the supply house for that job
Supply houses keep records of their own sales, not a certificate for every job a technician performs afterward. The employer's file is the record the requirement is actually asking about.
Memory Technique
Card in the wallet, copy in the file cabinet. Two places, and neither one is a regional office.
Reference Hint
40 CFR 82.161 requires that certification records be maintained at the place of business and available for EPA inspection.
More epa-608-type-1 Questions
An under-counter ice maker is one factory-sealed cabinet, while a modular ice machine head is joined to a remote condenser by field-run tubing. What certification does servicing the modular machine's circuit require?
A technician recovers refrigerant from a small appliance using a recovery machine that was manufactured in 1991. What recovery level must that older equipment achieve?
Two technicians recover from identical refrigerators with working compressors, one using a 1991 recovery machine and the other a 2015 machine. Why do their required recovery levels differ?
System-dependent recovery equipment may be used only on appliances that normally hold up to what amount of refrigerant?
What feature defines a self-contained recovery unit and sets it apart from the system-dependent kind?
When system-dependent recovery equipment is used on a small appliance whose compressor still runs, how can that working compressor be put to use?
Recovery from a small appliance has slowed down and the pressure is barely moving. What accepted technique helps drive the remaining refrigerant out?
After the recovery unit stops pulling on a small appliance, how does a technician confirm that the recovery is actually complete?
A sealed small appliance offers no service port at all. What has to happen before recovery equipment can be connected to it?
As refrigerant from a string of small appliances collects in a recovery cylinder, what fill limit applies to that cylinder?
People Also Study
Business & Financial Management
120 questions · 70% to pass
Contract Administration
60 questions · 70% to pass
Project Management
60 questions · 70% to pass
Related Study Resources
Previous Question
A helper assumes the four inches of mercury vacuum that satisfies small appliance recovery is the same depth of vacuum used to dry a system out before recharging. How do those two levels compare?
Next Question
At the end of a properly performed small appliance recovery, a small puff of vapor escapes as the low loss fitting is pulled off the access valve. How do the rules treat that particular release?