What requirement applies to recovery equipment manufactured on or after November 15, 1993 that will be used on small appliances?
Correct Answer
A) It must be certified by an EPA-approved testing laboratory as meeting the applicable small appliance recovery standard
Recovery and recycling equipment built on or after November 15, 1993 has to be tested and certified by an EPA-approved laboratory, and equipment intended for small appliances is tested against the small appliance recovery standard. The certification shows on the equipment label, which is what an inspector looks for. Registering machines with a state agency is not required, there is no federal three year recertification cycle, and Department of Transportation stamps apply to refrigerant cylinders rather than to recovery machines.
Why This Is the Correct Answer
EPA requires that recovery and recycling equipment manufactured on or after November 15, 1993 be certified by an approved third-party laboratory, which tests the machine against the recovery performance standard for the equipment class it serves. For small appliance machines that means demonstrating it can meet the required recovery level, and the certification appears on the equipment nameplate.
Why the Other Options Are Wrong
Option B: It must be registered with the state environmental agency, and the registration renewed before the first job of each year
No federal rule puts recovery machines on a state registry, annual or otherwise. Certification happens once, at the equipment level, when an EPA-approved laboratory tests the model and the machine is labeled accordingly.
Option C: It must be returned to the manufacturer for recertification every three years to keep its label valid
There is no federal recertification cycle for recovery machines. Manufacturers set their own maintenance intervals, but that is service work, and nothing about it makes or breaks the laboratory certification.
Option D: It must carry a Department of Transportation stamp on its housing showing the pressure it was tested to
Department of Transportation stamps and pressure test dates belong to refrigerant cylinders, which are shipping containers subject to periodic requalification. A recovery machine housing carries an EPA certification label instead.
Memory Technique
Machines get lab certified. Cylinders get DOT stamped. Do not swap the two.
Reference Hint
40 CFR 82.158: recovery and recycling equipment manufactured on or after November 15, 1993 must be laboratory certified.
More epa-608-type-1 Questions
An under-counter ice maker is one factory-sealed cabinet, while a modular ice machine head is joined to a remote condenser by field-run tubing. What certification does servicing the modular machine's circuit require?
A technician recovers refrigerant from a small appliance using a recovery machine that was manufactured in 1991. What recovery level must that older equipment achieve?
Two technicians recover from identical refrigerators with working compressors, one using a 1991 recovery machine and the other a 2015 machine. Why do their required recovery levels differ?
System-dependent recovery equipment may be used only on appliances that normally hold up to what amount of refrigerant?
What feature defines a self-contained recovery unit and sets it apart from the system-dependent kind?
When system-dependent recovery equipment is used on a small appliance whose compressor still runs, how can that working compressor be put to use?
Recovery from a small appliance has slowed down and the pressure is barely moving. What accepted technique helps drive the remaining refrigerant out?
After the recovery unit stops pulling on a small appliance, how does a technician confirm that the recovery is actually complete?
A sealed small appliance offers no service port at all. What has to happen before recovery equipment can be connected to it?
As refrigerant from a string of small appliances collects in a recovery cylinder, what fill limit applies to that cylinder?
People Also Study
Business & Financial Management
120 questions · 70% to pass
Contract Administration
60 questions · 70% to pass
Project Management
60 questions · 70% to pass
Related Study Resources
Previous Question
A household refrigerator's sealed circuit has been opened to change out a failed compressor, and the technician is laying out parts for the rebuild. What should happen to the filter drier that is already in the system?
Next Question
What feature defines a self-contained recovery unit and sets it apart from the system-dependent kind?