A construction sequence shows cabinets installed before rough plumbing corrections are inspected and walls closed. What is the likely schedule issue?
Correct Answer
D) Finish work is too early.
Finish installation should follow required rough corrections, inspections, and close-in work; otherwise rework and delays are likely.
Why This Is the Correct Answer
Finish installation should follow required rough corrections, inspections, and close-in work; otherwise rework and delays are likely.
Why the Other Options Are Wrong
Option A: Carry the estimate unchanged where a construction sequence shows cabinets installed before rough plumbing corrections are inspected and walls closed, and sort out the scope effect after award.
Carry the estimate unchanged where a construction sequence shows cabinets installed before rough plumbing corrections are inspected and walls closed, and sort out the scope effect after award. does not satisfy the required party, deadline, proof, license, bond, insurance, or agency trigger for construction sequencing.
Option B: Use the old drawing or assumption even though the a construction sequence shows cabinets installed before rough plumbing corrections are inspected and walls closed item may affect labor, materials, or sequencing.
Use the old drawing or assumption even though the a construction sequence shows cabinets installed before rough plumbing corrections are inspected and walls closed item may affect labor, materials, or sequencing. does not satisfy the required party, deadline, proof, license, bond, insurance, or agency trigger for construction sequencing.
Option C: Use the old drawing or assumption where a construction sequence shows cabinets installed before rough plumbing corrections are inspected and walls closed, even though labor, material, or sequencing may change.
Use the old drawing or assumption where a construction sequence shows cabinets installed before rough plumbing corrections are inspected and walls closed, even though labor, material, or sequencing may change. does not satisfy the required party, deadline, proof, license, bond, insurance, or agency trigger for construction sequencing.
Memory Technique
Construction Sequencing clock for Reviewing Remodel: party, date, proof, then rights.
Reference Hint
Study anchor (closed-book): memorize Construction sequencing from CSLB B General Building Study Guide; California Building Code, Title. / CSLB B General Building Study Guide project scheduling; know the rule or calculation trigger without relying on exam-room lookup.
More Class B Trade Questions
A 2-inch horizontal sanitary branch must be installed at 1/4 inch fall per foot. What total fall is needed over a 24-foot run?
A 4-inch building drain is laid out with a required 1/8 inch fall per foot. What fall is required across 40 feet?
A rooftop unit schedule shows 3 tons of cooling. Using 12,000 Btu per hour per ton, what cooling capacity is this?
A pump motor is listed as 2 horsepower, and the coordination table asks for watts. Using 746 watts per horsepower, what is the approximate motor power?
A slab is 30 feet long, 18 feet wide, and 4 inches thick. How many cubic yards of concrete are needed before waste?
A footing is 80 feet long, 2 feet wide, and 12 inches deep. How many cubic yards of concrete are required before waste?
A patio subgrade must drain at 2 percent away from the building for 20 feet. What total drop is required?
A building pad needs 150 compacted cubic yards of fill. If the borrow material shrinks 10 percent after compaction, about how many loose cubic yards should be hauled in?
A roofing estimate shows 2,850 square feet of roof area. How many roofing squares is that?
A waterproof deck surface is 14 feet deep and must slope 1/4 inch per foot to the drain. What vertical fall is needed?
People Also Study
Related Study Resources
Previous Question
A cripple wall retrofit has new plywood, but the specified connection from the cripple wall to the foundation is omitted. What is incomplete?
Next Question
The outdoor crew has fourteen workers who each need one quart of water per hour for 5 hours. How many quarts should the site stage?