On a single-family remodel during plan review, a single-phase resistive load draws 10 amperes at 240 volts; what is its power?

NASCLA Electrical exam practice question · Electrical Theory & Principles

On a single-family remodel during plan review, a single-phase resistive load draws 10 amperes at 240 volts; what is its power?

A24 watts
B240 watts
C24,000 watts
2,400 watts

Why D is correct

For a resistive single-phase load, P = V × I = 240 × 10 = 2,400 watts. The best answer is therefore “2,400 watts.” The other choices either address a different system, rely on an unsafe shortcut, or make a conclusion not supported by the stated facts.

Practice 11 more Electrical Theory & Principles questions

Timed mock exams, a wrong book and flashcards — one subscription covers every contractor exam line.

Start studying free

The control schematic shows the source voltage and total loop resistance. What current should the ammeter indicate?
The diagram shows two equal resistors connected in parallel. What is the equivalent resistance at the terminals?
Using the transformer data shown, what secondary voltage is expected for an ideal transformer?
Three resistors of 4, 6, and 10 ohms are connected in series. What is total resistance?
An ideal transformer steps voltage down by a factor of four. What happens to secondary current for the same apparent power?

On a single-family remodel during plan review, a single-phase resistive load draws 10 amperes at 240 volts; what is its power?

On a single-family remodel during plan review, a single-phase resistive load draws 10 amperes at 240 volts; what is its power?

More Electrical Theory & Principles questions