Under California's Title 24 Building Energy Efficiency Standards, which statement is correct regarding solar-ready requirements for new single-family homes?
Correct Answer
A) A solar-ready zone and electrical infrastructure must be provided for all new single-family homes
Title 24, Part 6, Section 110.10 requires all newly constructed single-family homes to include solar-ready infrastructure, including designated roof space, electrical panel capacity, and conduit pathways. This supports California's renewable energy goals and facilitates future solar installations.
Why This Is the Correct Answer
Title 24, Part 6, Section 110.10 mandates that ALL newly constructed single-family homes in California include solar-ready infrastructure: a designated solar-ready zone on the roof, electrical panel capacity reserved for solar, and conduit pathways to facilitate future PV system installation. This requirement applies statewide regardless of home size, climate zone, or whether the owner currently intends to install solar panels. California's 2020 energy code was the first in the nation to require solar on new homes.
Why the Other Options Are Wrong
Option B: Solar-ready conduit is required only for homes over 3,000 square feet
The 3,000 square foot size threshold does not exist in Title 24's solar-ready requirements. California requires solar-ready infrastructure for ALL new single-family homes — there is no size exemption. A small 800-square-foot home has the same solar-ready obligation as a large custom home.
Option C: Solar panels must be installed, but solar-ready infrastructure is optional
This statement reverses the actual requirement. California requires solar-ready infrastructure (the conduit, panel capacity, and designated zone) but does not require panels to actually be installed on every home — with some exceptions in the 2022 code. The infrastructure is mandatory; immediate panel installation may or may not be required depending on code cycle.
Option D: Solar-ready requirements apply only to homes in Climate Zones 1-8
Climate Zones 1-8 is an incorrect limitation. Title 24 solar-ready requirements apply statewide across all California climate zones (1-16). Climate zone-based restrictions do apply to some energy efficiency measures, but solar-ready infrastructure requirements are universal across the state.
Memory Technique
Think 'Every New Home in California = Solar-Ready': no exceptions for size or location. The state wants every new single-family home wired and roofed to accept solar panels, even if the owner doesn't install them immediately. Universal = no exemptions.
More trade-general-building Questions
When installing engineered lumber joists (I-joists) in California residential construction, what is the primary code requirement for web stiffeners?
What is the required attic ventilation ratio when a vapor retarder is installed on the warm-in-winter side of the ceiling according to the California Residential Code?
In California's Wildland-Urban Interface (WUI) areas, which underlayment requirement applies to Class A fire-rated roof assemblies?
In California, when installing a tankless water heater in a seismic zone, what additional requirement must be met beyond standard installation practices?
According to the California Building Code (CBC), what is the minimum lap splice length for #4 rebar in a concrete foundation wall in normal weight concrete with f'c = 3000 psi?
According to CBC requirements for retaining walls in California, what additional design consideration must be addressed for retaining walls over 4 feet in height located in seismic design categories D, E, and F?
When constructing retaining walls in California that exceed 4 feet in height, which CBC requirement must be met regarding drainage?
Under California regulations, when is a reduced pressure principle (RPP) backflow prevention assembly required for a residential water service connection?
Under California Title 24, what is the minimum electrical service size required for new single-family residential construction?
According to the California Building Code, buildings located in Seismic Design Category D must comply with which specific seismic design requirements?
People Also Study
Business & Financial Management
120 questions · 70% to pass
Contract Administration
60 questions · 70% to pass
Project Management
60 questions · 70% to pass
Related Study Resources
Previous Question
According to California's Title 24 Energy Code, what is the maximum allowed thermal bridging factor for wood framing in Climate Zone 16 (hot, dry climate) when calculating wall assembly U-factors?
Next Question
Under California Title 24 requirements, GFCI protection is required for all 125-volt, single-phase, 15- and 20-ampere receptacles installed in which location of a dwelling?