On a construction site, temporary heating equipment must be located at least how many feet away from combustible materials?
Correct Answer
C) 10 feet
OSHA requires temporary heating equipment to be located at least 10 feet away from combustible materials unless adequate shielding is provided. This clearance helps prevent fires from radiant heat or sparks.
Why This Is the Correct Answer
OSHA Standard 29 CFR 1926.154(a)(1) specifically requires temporary heating equipment to maintain a minimum clearance of 10 feet from combustible materials. This distance is established based on fire safety research that shows 10 feet provides adequate protection from radiant heat and potential sparks. The regulation allows for reduced clearance only when proper fire-resistant shielding is installed between the heating equipment and combustible materials. This standard applies to all temporary heating devices including salamanders, space heaters, and other portable heating units commonly used on construction sites.
Why the Other Options Are Wrong
Option A: 15 feet
25 feet is excessive and not required by OSHA regulations for temporary heating equipment
Option D: 25 feet
15 feet exceeds the required minimum distance and while safer, is not the regulatory requirement
Memory Technique
Think 'Perfect 10' - temporary heating needs a perfect 10-foot safety zone from combustibles
Reference Hint
OSHA Construction Standards 29 CFR 1926.154 - Temporary Heating Devices
More Project Mgmt Questions
What is the minimum R-value required for wall insulation in Florida Climate Zone 2?
A subcontractor brings a new chemical product to your jobsite. Under the Globally Harmonized System (GHS), what information must be immediately available to workers?
A construction site has a trench that is 8 feet deep in Type B soil. What is the maximum allowable slope ratio for the trench walls without protective systems?
What is the maximum recommended spacing between drywall screws when attaching to wood studs?
Your crew discovers suspected asbestos-containing materials during a renovation project. What is the first action you should take?
A scaffold platform is 12 feet long and 5 feet wide. If the maximum load capacity is 25 pounds per square foot, what is the total weight capacity of this platform?
Which CSI MasterFormat Division would contain specifications for fire-stopping and firesafing materials?
In tilt-up concrete construction, what is the primary advantage of this method over conventional cast-in-place construction?
Which OSHA standard specifically addresses construction industry safety and health regulations?
A structural drawing shows a beam labeled 'W12x26'. What does the '26' represent?
People Also Study
Business & Financial Management
120 questions · 70% to pass
Contract Administration
60 questions · 70% to pass