EstatePass
hi-tradeHawaii Trade Examhard

Hawaii Building Code requires special inspection for concrete placement in seismic design categories. What is the minimum frequency for concrete strength testing?

Correct Answer

A) One test per 50 cubic yards

Hawaii requires concrete strength testing at a minimum frequency of one test per 50 cubic yards for structural concrete in seismic design applications.

Answer Options
A
One test per 50 cubic yards
B
One test per 100 cubic yards
C
One test per 150 cubic yards
D
One test per day of placement

Why This Is the Correct Answer

The Hawaii Building Code mandates concrete strength testing at one test per 50 cubic yards for structural concrete in seismic design categories. This frequency ensures adequate quality control for critical structural elements that must withstand seismic forces. The 50 cubic yard interval provides sufficient sampling density to verify concrete strength meets design specifications while maintaining construction efficiency in earthquake-prone Hawaii.

Why the Other Options Are Wrong

Option B: One test per 100 cubic yards

One test per 100 cubic yards is insufficient for seismic design category concrete in Hawaii. This reduced frequency would provide inadequate quality control for structural elements that must resist earthquake forces. The Hawaii Building Code specifically requires more frequent testing at 50 cubic yard intervals to ensure proper concrete strength in seismic applications.

Option C: One test per 150 cubic yards

One test per 150 cubic yards represents dangerously infrequent testing for seismic design concrete. This extended interval would fail to provide adequate quality assurance for earthquake-resistant construction. Hawaii's seismic requirements demand much more frequent testing at 50 cubic yard intervals to verify concrete strength meets critical structural performance standards.

Option D: One test per day of placement

Testing frequency based on daily placement rather than volume is inappropriate for concrete quality control. Daily testing could result in inadequate sampling if large volumes are placed, or excessive testing for small pours. Volume-based testing at 50 cubic yards ensures consistent quality control regardless of placement schedule or crew productivity variations.

Was this explanation helpful?

More hi-trade Questions

A concrete mix design for coastal construction specifies a water-cement ratio of 0.40. If 650 lbs of cement is used per cubic yard, how many gallons of water should be added?

A contractor is installing hurricane straps rated at 1,500 pounds each. If the calculated uplift force on a rafter is 3,200 pounds, how many straps are required with a 2.0 safety factor?

What is the maximum allowable deflection for roof rafters under design wind loads in Hawaii's hurricane zones?

Which roofing attachment method is specifically required in Hawaii's hurricane zones for asphalt shingles on residential construction?

A building in Maui requires hurricane straps rated for 175 mph winds. If each strap must resist 1,200 lbs of uplift force and you have 48 roof-to-wall connections, what is the total uplift resistance provided?

During construction of a beachfront property, you notice white crystalline deposits forming on the concrete surface. This indicates:

You discover expansive clay soil conditions during excavation for a residential foundation in Kona. The plasticity index is 28. What foundation system is most appropriate?

According to Hawaii building requirements, hurricane straps connecting roof trusses to wall plates must be rated for what minimum uplift force in high wind zones?

A concrete slab foundation in Hawaii requires a vapor barrier. Due to high humidity and frequent rainfall, what type of vapor barrier is most appropriate?

A concrete slab in Hawaii requires a vapor barrier due to moisture conditions. The slab area is 1,200 sq ft and vapor barrier costs $0.85 per sq ft including 10% waste factor. What is the total material cost?

People Also Study

Related Study Resources

Practice More Contractor Exam Questions

Access all practice questions with progress tracking and adaptive difficulty to pass your Florida General Contractor exam.

Start Practicing

Disclaimer: EstatePass is an independent exam preparation platform and is not affiliated with, endorsed by, or connected to any state contractor licensing board, the Construction Industry Licensing Board (CILB), the Department of Business and Professional Regulation (DBPR), NASCLA, Pearson VUE, PSI, or any government agency. Exam requirements, fees, and regulations change frequently. Always verify current requirements with your state's licensing board before making decisions. Information shown was last verified on the dates indicated and may not reflect the most recent changes.