According to OSHA 29 CFR 1926.501, at what height do fall protection requirements begin for workers on walking/working surfaces with unprotected sides?
Correct Answer
D) 6 feet
OSHA 29 CFR 1926.501 requires fall protection systems when workers are on walking/working surfaces with unprotected sides and edges that are 6 feet or more above lower levels.
Why This Is the Correct Answer
OSHA 29 CFR 1926.501(b)(1) specifically states that employees on walking/working surfaces with unprotected sides or edges which are 6 feet (1.8 m) or more above the lower level shall be protected from falling by the use of guardrail systems, safety net systems, or personal fall arrest systems. This 6-foot threshold is the standard trigger height for fall protection requirements in construction. The regulation is clear and unambiguous about this measurement, making it a critical safety standard that all contractors must follow.
Why the Other Options Are Wrong
Option B: 8 feet
10 feet is far too high and would expose workers to significant fall hazards in the 6-10 foot range without required protection
Option C: 10 feet
8 feet exceeds OSHA's requirement and would leave workers unprotected in the 6-8 foot range where falls can still cause serious injury
Memory Technique
Think 'Six Feet Safe' - at 6 feet and above, you need fall protection to stay safe
Reference Hint
OSHA 29 CFR 1926 Subpart M - Fall Protection, specifically section 1926.501(b)(1)
More Business & Finance Questions
A general contractor purchases equipment worth $45,000 with a useful life of 9 years and no salvage value. Using straight-line depreciation, what is the annual depreciation expense?
What is the typical recommended coverage amount for general liability insurance for a small to medium-sized general contracting business?
A contractor estimates startup costs of $75,000 for equipment, $25,000 for initial inventory, $15,000 for insurance premiums, and $10,000 for working capital. They can finance 70% of the total. How much cash do they need?
When establishing professional relationships with architects and engineers, what is the most important factor for a general contractor to consider?
A partnership agreement for a construction company should address all of the following EXCEPT:
A contractor purchases a truck for $60,000. After 5 years, it has accumulated depreciation of $35,000. What is the truck's book value?
A contractor's business plan projects first-year revenue of $500,000 with a 15% net profit margin. If actual revenue is $450,000 with the same profit margin, what is the variance in net profit?
Using the Modified Accelerated Cost Recovery System (MACRS), construction equipment is typically depreciated over how many years?
A contractor is comparing financing options for equipment purchase. Option A: $80,000 cash purchase. Option B: $20,000 down, $65,000 financed at 6% for 4 years. What is the total cost of Option B?
A contractor purchases equipment using a capital lease with a present value of $120,000. How should this be recorded on the balance sheet?
People Also Study
Related Study Resources
Previous Question
A contractor needs to establish a 6-month operating expense reserve. Monthly expenses are: payroll $18,000, insurance $2,500, equipment payments $4,200, and office expenses $1,800. What should the reserve fund total?
Next Question
When calculating overhead costs for bid preparation, which of the following is NOT typically included in the calculation?