A site plan shows a building setback dimension of 25'-0" from the property line, but the building footprint appears to be only 20'-0" from the property line when scaled. As the general contractor, what is your primary concern?
Correct Answer
C) Potential zoning violation
Setback requirements are typically zoning regulations. If the building is closer to the property line than required, it could result in a zoning violation and stop work orders.
Why This Is the Correct Answer
Building setbacks are zoning requirements that establish minimum distances structures must maintain from property lines. When the actual building footprint (20'-0
Why the Other Options Are Wrong
Option A: Foundation design issues
Foundation design issues relate to structural engineering and soil conditions, not setback distances. The foundation can be properly designed regardless of the setback dimension discrepancy shown on the plans.
Option B: Utility line conflicts
While utility conflicts could occur, they are not the primary concern when comparing setback dimensions. Utility line locations are typically shown separately and would be addressed through utility coordination, not setback compliance.
Option D: The drawing scale is incorrect
While drawing scale could be incorrect, the question states specific dimensions (25'-0
Memory Technique
Remember 'SZ' - Setbacks = Zoning. When setback dimensions don't match, think Zoning violation first, not drawing errors.
More Project Mgmt Questions
What is the minimum R-value required for wall insulation in Florida Climate Zone 2?
A subcontractor brings a new chemical product to your jobsite. Under the Globally Harmonized System (GHS), what information must be immediately available to workers?
A construction site has a trench that is 8 feet deep in Type B soil. What is the maximum allowable slope ratio for the trench walls without protective systems?
What is the maximum recommended spacing between drywall screws when attaching to wood studs?
Your crew discovers suspected asbestos-containing materials during a renovation project. What is the first action you should take?
A scaffold platform is 12 feet long and 5 feet wide. If the maximum load capacity is 25 pounds per square foot, what is the total weight capacity of this platform?
Which CSI MasterFormat Division would contain specifications for fire-stopping and firesafing materials?
In tilt-up concrete construction, what is the primary advantage of this method over conventional cast-in-place construction?
Which OSHA standard specifically addresses construction industry safety and health regulations?
A structural drawing shows a beam labeled 'W12x26'. What does the '26' represent?
People Also Study
Business & Financial Management
120 questions · 70% to pass
Contract Administration
60 questions · 70% to pass