Your project requires hot work in an area 40 feet from combustible materials that cannot be moved. What is the minimum fire watch duration required after completion of hot work?
Correct Answer
C) 1 hour
When hot work is performed within 35 feet of combustible materials, a fire watch must be maintained for at least one hour after completion of the work to ensure no smoldering or delayed ignition occurs.
Why This Is the Correct Answer
CORRECT_ANSWER - When hot work is performed within 35 feet of combustible materials that cannot be moved, fire safety codes require a minimum one-hour fire watch after work completion. Since the scenario describes work 40 feet from combustibles, this still falls under enhanced fire watch requirements due to the proximity and immovable nature of the materials. The one-hour duration ensures adequate time to detect any smoldering, sparks, or delayed ignition that could occur after the visible work is complete.
Why the Other Options Are Wrong
Option A: 15 minutes
15 minutes is insufficient for detecting delayed ignition or smoldering materials that can occur well after hot work completion, especially when combustible materials are nearby.
Option B: 30 minutes
30 minutes does not meet the minimum code requirement for fire watch duration when hot work occurs near combustible materials that cannot be relocated.
Option D: 2 hours
2 hours exceeds the minimum required fire watch duration and would be unnecessarily costly and time-consuming for standard hot work operations near combustibles.
Memory Technique
Think 'Hot Hour' - hot work near combustibles requires one hour of watching. The '35-foot rule' triggers the one-hour minimum fire watch requirement.
Reference Hint
Florida Building Code Chapter 26 - Fire Safety During Construction, or NFPA 51B Standard for Fire Prevention During Welding, Cutting, and Other Hot Work
More Project Mgmt Questions
What is the minimum R-value required for wall insulation in Florida Climate Zone 2?
A subcontractor brings a new chemical product to your jobsite. Under the Globally Harmonized System (GHS), what information must be immediately available to workers?
A construction site has a trench that is 8 feet deep in Type B soil. What is the maximum allowable slope ratio for the trench walls without protective systems?
A detail drawing shows a scale of 3/4" = 1'-0". If a dimension measures 2.25 inches on the drawing, what is the actual dimension?
What is the maximum recommended spacing between drywall screws when attaching to wood studs?
People Also Study
Business & Financial Management
120 questions · 70% to pass
Contract Administration
60 questions · 70% to pass