Which OSHA standard specifically addresses construction industry safety and health regulations?
Correct Answer
B) 29 CFR 1926
29 CFR 1926 is the OSHA standard that specifically covers safety and health regulations for the construction industry. Other CFR sections cover different industries or aspects of workplace safety.
Why This Is the Correct Answer
29 CFR 1926 is specifically titled 'Safety and Health Regulations for Construction' and is the primary OSHA standard that governs all construction industry safety requirements. This regulation covers everything from personal protective equipment and fall protection to excavation safety and electrical standards on construction sites. As a general contractor, you must comply with 29 CFR 1926 standards for all construction activities. This is the most frequently referenced OSHA standard in construction and is essential knowledge for any contractor.
Why the Other Options Are Wrong
Option A: 29 CFR 1910
29 CFR 1910 covers general industry safety standards, not construction-specific regulations. While some 1910 standards may apply to construction in limited circumstances, 1926 is the primary construction standard.
Option C: 29 CFR 1904
29 CFR 1904 deals with recording and reporting occupational injuries and illnesses, not construction safety regulations. This is about documentation requirements, not safety standards.
Option D: 29 CFR 1915
29 CFR 1915 covers safety and health regulations for shipyard employment, which is a completely different industry from general construction.
Memory Technique
Remember '1926' as the year construction safety became serious - '19' for 1900s, '26' for construction (2+6=8, like a construction worker's 8-hour day)
Reference Hint
Florida Building Code, Chapter 1, Section 107 (Code Enforcement) or OSHA Construction Standards reference materials
More Project Mgmt Questions
What is the minimum R-value required for wall insulation in Florida Climate Zone 2?
A subcontractor brings a new chemical product to your jobsite. Under the Globally Harmonized System (GHS), what information must be immediately available to workers?
A construction site has a trench that is 8 feet deep in Type B soil. What is the maximum allowable slope ratio for the trench walls without protective systems?
A detail drawing shows a scale of 3/4" = 1'-0". If a dimension measures 2.25 inches on the drawing, what is the actual dimension?
What is the maximum recommended spacing between drywall screws when attaching to wood studs?