Which inspection typically occurs last in the construction sequence for a commercial building?
Correct Answer
B) Final building inspection
The final building inspection is typically the last inspection conducted before a Certificate of Occupancy can be issued. This comprehensive inspection verifies that all work has been completed according to approved plans and applicable codes.
Why This Is the Correct Answer
The final building inspection is the culminating inspection that occurs after all other specialized inspections have been completed and approved. This comprehensive inspection verifies that all construction work, including structural, mechanical, electrical, plumbing, and fire safety systems, has been completed according to approved plans and applicable building codes. Only after this final inspection passes can a Certificate of Occupancy be issued, allowing the building to be legally occupied.
Why the Other Options Are Wrong
Option A: Fire safety system inspection
Fire safety system inspection occurs earlier in the sequence, typically after the fire protection systems are installed but before the final building inspection. While critical for safety, it's one of the specialized inspections that must be completed and approved before the comprehensive final building inspection can take place.
Option C: Final electrical inspection
Final electrical inspection happens after electrical work is substantially complete but before the final building inspection. The electrical systems must be inspected and approved as part of the sequence leading up to the comprehensive final building inspection that evaluates all building systems together.
Option D: Elevator inspection
Elevator inspection occurs after elevator installation and testing but before the final building inspection. Like other specialized system inspections, the elevator must be inspected and approved before the building can receive its comprehensive final inspection and Certificate of Occupancy.
Memory Technique
Think 'FINAL means FINAL' - the final building inspection is the last comprehensive check that brings together all previously approved specialized inspections before issuing the Certificate of Occupancy.
More Contract Admin Questions
A project experiences a 30-day delay due to unusually severe weather. The contract includes a liquidated damages clause of $1,000 per day for delays. If the weather delay is excusable but not compensable, what liquidated damages apply?
A commercial project requires a total of 12 inspections. The building department charges $85 per inspection for the first 5 inspections, $65 for inspections 6-10, and $45 for any additional inspections. What is the total inspection fee?
What document must be posted at the job site before a Certificate of Occupancy can be issued for a commercial building?
A mixed-use development requires a variance for reduced setbacks. The property is located within 500 feet of a hospital. What additional consideration must be addressed?
A LEED project requires tracking of regional materials. Materials are considered regional if they are extracted, harvested, or recovered, as well as manufactured within what distance of the project site?
An indemnification clause in a construction contract typically requires the contractor to:
A property owner wants to convert a single-family home into a duplex in an area zoned for single-family residential use. The conversion meets all building codes but violates density requirements. What approval is needed?
As-built drawings are typically required to be submitted:
AIA Document A401 is primarily used for:
A general contractor is building a 12,000 square foot commercial warehouse. The building permit fee is calculated at $8.50 per $1,000 of construction value. If the project value is $2,400,000, what is the building permit fee?
People Also Study
Business & Financial Management
120 questions · 70% to pass
Project Management
60 questions · 70% to pass
Related Study Resources
Previous Question
A LEED project requires tracking of regional materials. Materials are considered regional if they are extracted, harvested, or recovered, as well as manufactured within what distance of the project site?
Next Question
To achieve LEED certification, a project must earn a minimum of how many points?