Which inspection must be completed before a concrete foundation can be poured?
Correct Answer
C) Footing inspection
The footing inspection must be completed and approved before concrete can be poured for the foundation. This ensures proper excavation depth, reinforcement placement, and compliance with structural requirements.
Why This Is the Correct Answer
The footing inspection is a critical prerequisite that must be completed and approved before any concrete foundation can be poured. This inspection verifies that the excavation is at the proper depth, the soil conditions are adequate, reinforcement steel (rebar) is correctly placed and sized, and all structural requirements per the approved plans are met. The inspector ensures the footing dimensions, elevation, and reinforcement comply with building codes and engineering specifications before authorizing concrete placement.
Why the Other Options Are Wrong
Option A: Rough-in inspection
Rough-in inspection occurs much later in the construction process, typically after framing is complete and before walls are closed up. It involves checking electrical, plumbing, and mechanical systems that are installed within the framed structure, not foundation work.
Option B: Final inspection
Final inspection is the last inspection performed when construction is completely finished and ready for occupancy. It occurs after all work is done, utilities are connected, and all previous inspections have been approved - not before foundation concrete is poured.
Option D: Framing inspection
Framing inspection takes place after the foundation is complete and the structural framing (walls, floors, roof structure) has been erected. It cannot occur before the foundation exists, making it impossible to happen before concrete pouring.
Memory Technique
Remember 'Feet before Foundation' - you must inspect the FOOTING (where the foundation's feet will stand) before pouring the foundation concrete.
More Contract Admin Questions
A project experiences a 30-day delay due to unusually severe weather. The contract includes a liquidated damages clause of $1,000 per day for delays. If the weather delay is excusable but not compensable, what liquidated damages apply?
A commercial project requires a total of 12 inspections. The building department charges $85 per inspection for the first 5 inspections, $65 for inspections 6-10, and $45 for any additional inspections. What is the total inspection fee?
What document must be posted at the job site before a Certificate of Occupancy can be issued for a commercial building?
A mixed-use development requires a variance for reduced setbacks. The property is located within 500 feet of a hospital. What additional consideration must be addressed?
A LEED project requires tracking of regional materials. Materials are considered regional if they are extracted, harvested, or recovered, as well as manufactured within what distance of the project site?
An indemnification clause in a construction contract typically requires the contractor to:
A property owner wants to convert a single-family home into a duplex in an area zoned for single-family residential use. The conversion meets all building codes but violates density requirements. What approval is needed?
As-built drawings are typically required to be submitted:
AIA Document A401 is primarily used for:
A general contractor is building a 12,000 square foot commercial warehouse. The building permit fee is calculated at $8.50 per $1,000 of construction value. If the project value is $2,400,000, what is the building permit fee?
People Also Study
Business & Financial Management
120 questions · 70% to pass
Project Management
60 questions · 70% to pass