What is the minimum frequency for documented safety meetings required by Florida Statute 440.107 for construction projects?
Correct Answer
A) Every 10 working days
Florida Statute 440.107 requires documented safety meetings at least every 10 working days on construction projects. These meetings must be documented and records maintained as part of the safety program requirements.
Why This Is the Correct Answer
Florida Statute 440.107 specifically mandates that construction projects must conduct documented safety meetings at least every 10 working days. This requirement is part of Florida's comprehensive workplace safety regulations for construction sites. The statute emphasizes both the frequency (every 10 working days) and the documentation requirement, making this a specific legal obligation rather than a general guideline. Contractors must maintain records of these meetings as evidence of compliance with state safety requirements.
Why the Other Options Are Wrong
Option B: Monthly
Monthly meetings would not meet the statutory requirement of every 10 working days. Since there are typically 20-22 working days in a month, monthly meetings would allow too much time between safety discussions, potentially compromising worker safety and violating the specific frequency mandated by Florida law.
Option C: Florida does not specify a minimum frequency
This is incorrect because Florida Statute 440.107 does specify a minimum frequency requirement. The statute explicitly states that safety meetings must occur at least every 10 working days, making this a clear legal mandate rather than leaving frequency to contractor discretion.
Option D: Weekly
Weekly meetings, while more frequent than required, do not represent the minimum frequency specified by the statute. The law requires meetings every 10 working days, which is less frequent than weekly. Understanding the exact statutory requirement is important for compliance and exam purposes.
Memory Technique
Remember 'Florida TEN' - Florida statute requires safety meetings every TEN working days, not weekly or monthly.
More Contract Admin Questions
A project experiences a 30-day delay due to unusually severe weather. The contract includes a liquidated damages clause of $1,000 per day for delays. If the weather delay is excusable but not compensable, what liquidated damages apply?
A commercial project requires a total of 12 inspections. The building department charges $85 per inspection for the first 5 inspections, $65 for inspections 6-10, and $45 for any additional inspections. What is the total inspection fee?
What document must be posted at the job site before a Certificate of Occupancy can be issued for a commercial building?
A mixed-use development requires a variance for reduced setbacks. The property is located within 500 feet of a hospital. What additional consideration must be addressed?
A LEED project requires tracking of regional materials. Materials are considered regional if they are extracted, harvested, or recovered, as well as manufactured within what distance of the project site?
An indemnification clause in a construction contract typically requires the contractor to:
A property owner wants to convert a single-family home into a duplex in an area zoned for single-family residential use. The conversion meets all building codes but violates density requirements. What approval is needed?
As-built drawings are typically required to be submitted:
AIA Document A401 is primarily used for:
A general contractor is building a 12,000 square foot commercial warehouse. The building permit fee is calculated at $8.50 per $1,000 of construction value. If the project value is $2,400,000, what is the building permit fee?
People Also Study
Business & Financial Management
120 questions · 70% to pass
Project Management
60 questions · 70% to pass