Under the Globally Harmonized System (GHS), Safety Data Sheets must be readily accessible to employees during their work shift. How many sections must a compliant SDS contain?
Correct Answer
C) 16 sections
A GHS-compliant Safety Data Sheet must contain exactly 16 sections with standardized information about chemical hazards, handling procedures, and emergency measures. This standardization helps ensure consistent hazard communication across all industries.
Why This Is the Correct Answer
The Globally Harmonized System (GHS) mandates that Safety Data Sheets contain exactly 16 standardized sections. This international standard was adopted by OSHA to ensure consistent hazard communication worldwide. The 16 sections cover everything from product identification and hazard classification to regulatory information and transport details. This standardization allows workers and emergency responders to quickly locate critical safety information regardless of the chemical manufacturer or country of origin.
Why the Other Options Are Wrong
Option A: 12 sections
12 sections is insufficient under GHS requirements and represents an outdated or non-compliant format that doesn't meet current OSHA standards.
Option B: 14 sections
14 sections falls short of the GHS requirement and would not provide all the mandatory information categories needed for proper hazard communication.
Option D: 18 sections
18 sections exceeds the GHS standard and would indicate a non-compliant SDS format that includes unnecessary or non-standardized information.
Memory Technique
Think 'Sweet 16' - just like the milestone birthday, GHS SDS has 16 sections that represent a major milestone in global safety standardization.
Reference Hint
OSHA 29 CFR 1910.1200 - Hazard Communication Standard, specifically the section on Safety Data Sheets requirements
More Project Mgmt Questions
What is the minimum R-value required for wall insulation in Florida Climate Zone 2?
A subcontractor brings a new chemical product to your jobsite. Under the Globally Harmonized System (GHS), what information must be immediately available to workers?
A construction site has a trench that is 8 feet deep in Type B soil. What is the maximum allowable slope ratio for the trench walls without protective systems?
A detail drawing shows a scale of 3/4" = 1'-0". If a dimension measures 2.25 inches on the drawing, what is the actual dimension?
What is the maximum recommended spacing between drywall screws when attaching to wood studs?
People Also Study
Business & Financial Management
120 questions · 70% to pass
Contract Administration
60 questions · 70% to pass