In the CSI MasterFormat system, which division would include fire suppression systems?
Correct Answer
A) Division 21 - Fire Suppression
Division 21 in the CSI MasterFormat specifically covers Fire Suppression systems including sprinklers, standpipes, and fire pumps. This is separate from plumbing (Division 22) and HVAC (Division 23).
Why This Is the Correct Answer
Division 21 in the CSI MasterFormat is specifically designated for Fire Suppression systems. This division encompasses all fire protection equipment including automatic sprinkler systems, standpipe systems, fire pumps, foam systems, and clean agent suppression systems. The CSI MasterFormat organizes construction specifications into logical divisions, and fire suppression has its own dedicated division separate from other mechanical systems. This division was established to clearly distinguish fire protection systems from general plumbing and HVAC work due to their specialized nature and code requirements.
Why the Other Options Are Wrong
Option B: Division 22 - Plumbing
Division 22 covers Plumbing systems including water supply, sanitary waste, storm drainage, and plumbing fixtures. While fire suppression systems may use water, they are classified separately due to their life safety function and specialized design requirements.
Option C: Division 23 - HVAC
Division 23 covers Heating, Ventilating, and Air Conditioning (HVAC) systems including heating equipment, cooling equipment, and air distribution systems. Fire suppression is not part of climate control systems.
Option D: Division 28 - Electronic Safety and Security
Division 28 covers Electronic Safety and Security systems such as fire alarm systems, security systems, and access control. While fire alarms work with fire suppression, the actual suppression equipment (sprinklers, pumps, piping) is in Division 21.
Memory Technique
Think '21 to save everyone' - Division 21 Fire Suppression saves lives, making it important enough to have its own division separate from regular mechanical systems.
Reference Hint
CSI MasterFormat Division listings or construction specifications reference materials, typically found in project manual organization sections
More Project Mgmt Questions
What is the minimum R-value required for wall insulation in Florida Climate Zone 2?
A subcontractor brings a new chemical product to your jobsite. Under the Globally Harmonized System (GHS), what information must be immediately available to workers?
A construction site has a trench that is 8 feet deep in Type B soil. What is the maximum allowable slope ratio for the trench walls without protective systems?
A detail drawing shows a scale of 3/4" = 1'-0". If a dimension measures 2.25 inches on the drawing, what is the actual dimension?
What is the maximum recommended spacing between drywall screws when attaching to wood studs?
People Also Study
Business & Financial Management
120 questions · 70% to pass
Contract Administration
60 questions · 70% to pass