According to the Florida Building Code, what is the minimum clear width required for an accessible door opening?
Correct Answer
B) 32 inches
The Florida Building Code requires a minimum clear opening width of 32 inches for accessible doors when the door is open 90 degrees. This is measured from the face of the door to the stop on the latch side.
Why This Is the Correct Answer
The Florida Building Code requires a minimum clear opening width of 32 inches for accessible doors to comply with ADA accessibility standards. This measurement is taken when the door is fully open at 90 degrees, measured from the face of the door to the door stop on the latch side. This 32-inch clear width ensures adequate space for wheelchair users and individuals with mobility devices to pass through comfortably. The requirement is consistent with federal ADA guidelines that Florida has adopted into its building code.
Why the Other Options Are Wrong
Option A: 30 inches
30 inches is insufficient to meet ADA accessibility requirements and would not provide adequate clearance for wheelchair users or individuals with mobility devices to pass through safely and comfortably.
Option C: 34 inches
34 inches exceeds the minimum requirement, and while it would be acceptable, it is not the minimum standard required by the Florida Building Code for accessible door openings.
Option D: 36 inches
36 inches exceeds the minimum requirement and while it would be acceptable, it is not the minimum standard required by the Florida Building Code for accessible door openings.
Memory Technique
Think '32 for accessibility' - the number 32 sounds like 'thirty-two' which rhymes with 'ADA through' to remember that 32 inches is what ADA users need to get through doors.
Reference Hint
Florida Building Code, Chapter 11 - Accessibility, or Florida Accessibility Code for Building Construction (FACBC)
More Project Mgmt Questions
What is the minimum R-value required for wall insulation in Florida Climate Zone 2?
A subcontractor brings a new chemical product to your jobsite. Under the Globally Harmonized System (GHS), what information must be immediately available to workers?
A construction site has a trench that is 8 feet deep in Type B soil. What is the maximum allowable slope ratio for the trench walls without protective systems?
A detail drawing shows a scale of 3/4" = 1'-0". If a dimension measures 2.25 inches on the drawing, what is the actual dimension?
What is the maximum recommended spacing between drywall screws when attaching to wood studs?
People Also Study
Business & Financial Management
120 questions · 70% to pass
Contract Administration
60 questions · 70% to pass