According to Florida Statute 489.119, what is the maximum fine for contracting without a license?
Correct Answer
C) $10,000
Florida Statute 489.119 establishes a maximum fine of $10,000 for contracting without a license. This penalty emphasizes the importance of proper licensing for public protection and industry standards.
Why This Is the Correct Answer
Florida Statute 489.119 specifically establishes the maximum fine for contracting without a license at $10,000. This statute is part of Florida's comprehensive licensing enforcement framework designed to protect consumers from unlicensed contractors. The $10,000 maximum fine serves as a significant deterrent while being proportionate to the violation. This penalty amount has been carefully set by the legislature to balance enforcement effectiveness with reasonable punishment.
Why the Other Options Are Wrong
Option A: $25,000
$5,000 is too low and does not reflect the actual statutory maximum established in Florida Statute 489.119
Option D: $15,000
$25,000 significantly exceeds the actual statutory maximum fine established in Florida Statute 489.119
Memory Technique
Think 'Ten Thousand Trouble' - contracting without a license can cost you up to $10,000 in fines, which is serious trouble for any contractor
Reference Hint
Florida Statutes Chapter 489 - Construction Industry Licensing, specifically Section 489.119 regarding penalties and enforcement
More Contract Admin Questions
A project experiences a 30-day delay due to unusually severe weather. The contract includes a liquidated damages clause of $1,000 per day for delays. If the weather delay is excusable but not compensable, what liquidated damages apply?
A commercial project requires a total of 12 inspections. The building department charges $85 per inspection for the first 5 inspections, $65 for inspections 6-10, and $45 for any additional inspections. What is the total inspection fee?
What document must be posted at the job site before a Certificate of Occupancy can be issued for a commercial building?
A mixed-use development requires a variance for reduced setbacks. The property is located within 500 feet of a hospital. What additional consideration must be addressed?
A LEED project requires tracking of regional materials. Materials are considered regional if they are extracted, harvested, or recovered, as well as manufactured within what distance of the project site?
An indemnification clause in a construction contract typically requires the contractor to:
A property owner wants to convert a single-family home into a duplex in an area zoned for single-family residential use. The conversion meets all building codes but violates density requirements. What approval is needed?
As-built drawings are typically required to be submitted:
AIA Document A401 is primarily used for:
A general contractor is building a 12,000 square foot commercial warehouse. The building permit fee is calculated at $8.50 per $1,000 of construction value. If the project value is $2,400,000, what is the building permit fee?
People Also Study
Business & Financial Management
120 questions · 70% to pass
Project Management
60 questions · 70% to pass