A worker is required to wear a full-face respirator, hard hat, safety glasses, and hearing protection. This combination violates which PPE principle?
Correct Answer
A) Equipment compatibility
Wearing safety glasses under a full-face respirator violates equipment compatibility principles. The safety glasses can interfere with the respirator's face seal, compromising protection against airborne hazards.
Why This Is the Correct Answer
Equipment compatibility is the correct answer because wearing safety glasses underneath a full-face respirator creates a physical interference that breaks the respirator's seal against the face. The temples and frames of safety glasses prevent the respirator from forming a proper airtight seal, which is critical for protecting against airborne contaminants. This combination of PPE violates the fundamental principle that all personal protective equipment must work together without compromising each other's effectiveness.
Why the Other Options Are Wrong
Option B: Proper fit testing
Proper fit testing refers to the procedure of testing whether a respirator seals properly on an individual's face, but the issue here isn't about the testing process itself - it's about the physical incompatibility of wearing two pieces of equipment simultaneously that interfere with each other's function.
Option C: Maintenance requirements
Maintenance requirements involve the proper cleaning, storage, inspection, and replacement of PPE equipment. The scenario describes a usage issue, not a maintenance problem - the equipment could be perfectly maintained but still incompatible when used together.
Option D: Training documentation
Training documentation refers to records showing workers have been properly trained on PPE use. While proper training would teach workers not to make this mistake, the fundamental issue is the physical incompatibility of the equipment combination, not missing documentation.
Memory Technique
Use the acronym 'FACE' - Full-face respirators Already Cover Eyes, so adding glasses breaks the seal.
Reference Hint
OSHA 29 CFR 1926.95 Personal Protective Equipment and 29 CFR 1926.103 Respiratory Protection - look for sections on equipment compatibility and proper respirator use
More Project Mgmt Questions
What is the minimum R-value required for wall insulation in Florida Climate Zone 2?
A subcontractor brings a new chemical product to your jobsite. Under the Globally Harmonized System (GHS), what information must be immediately available to workers?
A construction site has a trench that is 8 feet deep in Type B soil. What is the maximum allowable slope ratio for the trench walls without protective systems?
A detail drawing shows a scale of 3/4" = 1'-0". If a dimension measures 2.25 inches on the drawing, what is the actual dimension?
What is the maximum recommended spacing between drywall screws when attaching to wood studs?
People Also Study
Business & Financial Management
120 questions · 70% to pass
Contract Administration
60 questions · 70% to pass
Previous Question
According to OSHA 29 CFR 1926.501, at what height must fall protection be provided for employees working on walking/working surfaces?
Next Question
You are reviewing shop drawings for structural steel that differ from the original design drawings. What is your primary responsibility as the general contractor?