Which OSHA standard specifically addresses construction industry safety and health regulations?
Correct Answer
A) 29 CFR 1926
29 CFR 1926 is the OSHA standard that specifically covers safety and health regulations for the construction industry. Other CFR sections cover different industries or aspects of workplace safety.
Why This Is the Correct Answer
29 CFR 1926 is specifically titled 'Safety and Health Regulations for Construction' and is the primary OSHA standard that governs all construction industry safety requirements. This regulation covers everything from personal protective equipment and fall protection to excavation safety and electrical standards on construction sites. As a general contractor, you must comply with 29 CFR 1926 standards for all construction activities. This is the most frequently referenced OSHA standard in construction and is essential knowledge for any contractor.
Why the Other Options Are Wrong
Option B: 29 CFR 1904
29 CFR 1910 covers general industry safety standards, not construction-specific regulations. While some 1910 standards may apply to construction in limited circumstances, 1926 is the primary construction standard.
Option C: 29 CFR 1915
29 CFR 1915 covers safety and health regulations for shipyard employment, which is a completely different industry from general construction.
Memory Technique
Remember '1926' as the year construction safety became serious - '19' for 1900s, '26' for construction (2+6=8, like a construction worker's 8-hour day)
Reference Hint
Florida Building Code, Chapter 1, Section 107 (Code Enforcement) or OSHA Construction Standards reference materials
More Project Mgmt Questions
What is the minimum R-value required for wall insulation in Florida Climate Zone 2?
A subcontractor brings a new chemical product to your jobsite. Under the Globally Harmonized System (GHS), what information must be immediately available to workers?
A construction site has a trench that is 8 feet deep in Type B soil. What is the maximum allowable slope ratio for the trench walls without protective systems?
What is the maximum recommended spacing between drywall screws when attaching to wood studs?
Your crew discovers suspected asbestos-containing materials during a renovation project. What is the first action you should take?
A scaffold platform is 12 feet long and 5 feet wide. If the maximum load capacity is 25 pounds per square foot, what is the total weight capacity of this platform?
Which CSI MasterFormat Division would contain specifications for fire-stopping and firesafing materials?
In tilt-up concrete construction, what is the primary advantage of this method over conventional cast-in-place construction?
A structural drawing shows a beam labeled 'W12x26'. What does the '26' represent?
An accessible parking space detail shows dimensions of 8 feet wide with a 5-foot access aisle. A van-accessible space is also required. What should be the width of the van-accessible space?
People Also Study
Business & Financial Management
120 questions · 70% to pass
Contract Administration
60 questions · 70% to pass