A worker on your job site has been assigned to operate a jackhammer for concrete demolition. Which PPE is NOT specifically required by OSHA for this task?
Correct Answer
D) Cut-resistant gloves
While cut-resistant gloves may be beneficial, they are not specifically required by OSHA for jackhammer operation. Eye protection, hearing protection, and foot protection are mandated.
Why This Is the Correct Answer
Cut-resistant gloves are not specifically mandated by OSHA for jackhammer operation. While they may provide additional protection against abrasions, OSHA's specific requirements for jackhammer work focus on protection from the primary hazards: flying debris (eye protection), noise exposure (hearing protection), and falling objects or equipment contact with feet (steel-toed boots). Cut-resistant gloves fall under general hand protection recommendations rather than specific OSHA requirements for this task.
Why the Other Options Are Wrong
Option A: Safety glasses or goggles
Safety glasses or goggles are specifically required by OSHA for jackhammer operation due to the high risk of flying concrete debris and dust that can cause serious eye injuries.
Option B: Hearing protection
Hearing protection is specifically required by OSHA for jackhammer operation because jackhammers typically produce noise levels exceeding 85 decibels, which can cause permanent hearing damage.
Option C: Steel-toed boots
Steel-toed boots are specifically required by OSHA for jackhammer operation to protect feet from falling concrete chunks, dropped equipment, and potential contact with the heavy jackhammer itself.
Memory Technique
Use the acronym 'SEF' for jackhammer PPE: Safety glasses (eyes), Ear protection (hearing), Foot protection (steel-toed boots). Notice 'H' for hands/gloves is missing from the required list.
Reference Hint
OSHA Construction Standards 29 CFR 1926 Subpart E - Personal Protective and Life Saving Equipment, specifically sections on eye/face protection (1926.95), hearing protection (1926.95), and foot protection (1926.96)
More Project Mgmt Questions
What is the minimum R-value required for wall insulation in Florida Climate Zone 2?
A subcontractor brings a new chemical product to your jobsite. Under the Globally Harmonized System (GHS), what information must be immediately available to workers?
A construction site has a trench that is 8 feet deep in Type B soil. What is the maximum allowable slope ratio for the trench walls without protective systems?
A detail drawing shows a scale of 3/4" = 1'-0". If a dimension measures 2.25 inches on the drawing, what is the actual dimension?
What is the maximum recommended spacing between drywall screws when attaching to wood studs?
People Also Study
Business & Financial Management
120 questions · 70% to pass
Contract Administration
60 questions · 70% to pass