What is the minimum concrete cover required for #4 rebar in a residential foundation footing according to Florida Building Code?
Correct Answer
C) 3 inches
The Florida Building Code requires a minimum of 3 inches of concrete cover for reinforcing steel in footings to protect against corrosion and ensure proper bond.
Why This Is the Correct Answer
The Florida Building Code requires a minimum of 3 inches of concrete cover for reinforcing steel in footings to provide adequate protection against corrosion from moisture and soil contact. This cover requirement ensures proper bond between the concrete and rebar while maintaining structural integrity. The 3-inch minimum is specifically established for footings which are in direct contact with soil and subject to moisture exposure. This requirement applies regardless of rebar size, including #4 rebar commonly used in residential foundation footings.
Why the Other Options Are Wrong
Option A: 1 inch
1 inch of cover is insufficient for footings as it doesn't provide adequate protection against corrosion from soil moisture and doesn't meet the minimum code requirements for concrete cast against earth.
Option B: 2 inches
2 inches of cover, while used for some above-grade applications, is still insufficient for footings which require greater protection due to direct soil contact and moisture exposure.
Option D: 4 inches
4 inches of cover exceeds the minimum requirement and while not incorrect from a safety standpoint, it's not the minimum required by code and would be unnecessarily conservative and wasteful.
Memory Technique
Use '3 for footings' - footings need 3 inches because they're the foundation's 'feet' that touch the ground and need maximum protection from soil moisture.
Reference Hint
Florida Building Code Chapter 19 (Concrete) or ACI 318 Table 20.5.1.3.1 for concrete cover requirements
More Project Mgmt Questions
What is the minimum R-value required for wall insulation in Florida Climate Zone 2?
A subcontractor brings a new chemical product to your jobsite. Under the Globally Harmonized System (GHS), what information must be immediately available to workers?
A construction site has a trench that is 8 feet deep in Type B soil. What is the maximum allowable slope ratio for the trench walls without protective systems?
A detail drawing shows a scale of 3/4" = 1'-0". If a dimension measures 2.25 inches on the drawing, what is the actual dimension?
What is the maximum recommended spacing between drywall screws when attaching to wood studs?
People Also Study
Business & Financial Management
120 questions · 70% to pass
Contract Administration
60 questions · 70% to pass
Previous Question
A sandy soil has a bearing capacity of 2,000 psf. What is the maximum allowable load for a footing that measures 4 feet by 6 feet?
Next Question
A commercial project requires 12,000 square feet of VCT flooring. If the tiles are 12 inches by 12 inches and come in boxes of 45 tiles, how many boxes are needed including 10% waste?