When constructing batter boards for site layout, what is the primary purpose of setting them at least 4 feet back from the excavation lines?
Correct Answer
B) To prevent damage during excavation operations
Batter boards are set back from excavation lines to prevent damage from excavation equipment and soil movement. This ensures the reference points remain accurate throughout construction.
Why This Is the Correct Answer
Batter boards serve as critical reference points for building layout and must remain undisturbed throughout the construction process. Setting them at least 4 feet back from excavation lines protects them from damage caused by heavy excavation equipment, soil cave-ins, and general construction activities. If batter boards are damaged or moved, the entire building layout becomes compromised, potentially leading to costly errors in foundation placement. The 4-foot setback provides a safe buffer zone while still maintaining accurate sight lines for construction layout.
Why the Other Options Are Wrong
Option A: To comply with OSHA setback requirements
While OSHA has various setback requirements for excavations, the 4-foot batter board setback is not specifically an OSHA requirement but rather a construction best practice for protecting layout references.
Option C: To provide adequate working space for surveyors
Although the setback does provide working space, this is a secondary benefit rather than the primary purpose, which is protecting the batter boards from excavation damage.
Option D: To meet local building code requirements
The 4-foot setback is not typically specified in local building codes but is a standard construction practice for protecting layout references during excavation.
Memory Technique
Think 'BATTER BETTER BACK' - Batter boards work better when set back from danger zones like excavation areas.
Reference Hint
Look up 'Site Layout and Excavation' or 'Batter Boards' in construction management references, typically found in site preparation chapters.
More Project Mgmt Questions
What is the minimum R-value required for wall insulation in Florida Climate Zone 2?
A subcontractor brings a new chemical product to your jobsite. Under the Globally Harmonized System (GHS), what information must be immediately available to workers?
A construction site has a trench that is 8 feet deep in Type B soil. What is the maximum allowable slope ratio for the trench walls without protective systems?
A detail drawing shows a scale of 3/4" = 1'-0". If a dimension measures 2.25 inches on the drawing, what is the actual dimension?
What is the maximum recommended spacing between drywall screws when attaching to wood studs?
People Also Study
Business & Financial Management
120 questions · 70% to pass
Contract Administration
60 questions · 70% to pass