When must a written hazard communication program be established on a construction site?
Correct Answer
B) When any hazardous chemicals are present
OSHA requires a written hazard communication program whenever any hazardous chemicals are present in the workplace, regardless of quantity. This ensures workers are informed about chemical hazards and protective measures.
Why This Is the Correct Answer
OSHA's Hazard Communication Standard (29 CFR 1910.1200) mandates that employers must establish a written hazard communication program whenever any hazardous chemicals are present in the workplace. This requirement has no minimum quantity threshold or numerical trigger - even a single hazardous chemical necessitates a written program. The standard applies to all workplaces where employees may be exposed to hazardous chemicals under normal operating conditions or in foreseeable emergencies. This ensures comprehensive worker protection and compliance with federal safety regulations.
Why the Other Options Are Wrong
Option A: When 5 or more chemicals are present
The number of chemicals present is irrelevant - OSHA requires a written program for any hazardous chemicals, whether it's 1 chemical or 100 chemicals.
Option C: When requested by workers
The requirement is mandatory under OSHA regulations and does not depend on worker requests - employers must proactively establish the program when hazardous chemicals are present.
Option D: Only for chemicals above threshold quantities
There are no threshold quantities in OSHA's Hazard Communication Standard - any amount of hazardous chemicals triggers the requirement for a written program.
Memory Technique
Use the acronym 'ANY HazCom' - ANY hazardous chemicals require a HazCom (Hazard Communication) program in writing.
Reference Hint
OSHA Construction Standards 29 CFR 1926.95 or general OSHA Hazard Communication Standard 29 CFR 1910.1200
More Project Mgmt Questions
What is the minimum R-value required for wall insulation in Florida Climate Zone 2?
A subcontractor brings a new chemical product to your jobsite. Under the Globally Harmonized System (GHS), what information must be immediately available to workers?
A construction site has a trench that is 8 feet deep in Type B soil. What is the maximum allowable slope ratio for the trench walls without protective systems?
A detail drawing shows a scale of 3/4" = 1'-0". If a dimension measures 2.25 inches on the drawing, what is the actual dimension?
What is the maximum recommended spacing between drywall screws when attaching to wood studs?
People Also Study
Business & Financial Management
120 questions · 70% to pass
Contract Administration
60 questions · 70% to pass