On a plumbing plan, what does the symbol "CO" typically represent?
Correct Answer
B) Cleanout
CO on plumbing plans stands for cleanout, which provides access for cleaning and maintaining drainage systems. Cleanouts are required at specific intervals and locations per plumbing codes.
Why This Is the Correct Answer
CO on plumbing plans universally stands for 'cleanout,' which is a critical access point in drainage systems. Cleanouts are strategically placed fittings that allow plumbers to insert cleaning equipment like snakes or cables to clear blockages. They are mandatory components required by plumbing codes at specific intervals along drain lines, at changes in direction, and at the base of vertical stacks. These access points are essential for maintenance and troubleshooting of drainage systems.
Why the Other Options Are Wrong
Option A: Cold water outlet
While cold water systems exist in plumbing, they are typically abbreviated as 'CW' (cold water) rather than 'CO'. Cold water outlets would be shown with different symbols and abbreviations on plumbing plans.
Option C: Carbon monoxide detector
Carbon monoxide detectors are not part of plumbing systems - they are electrical/safety devices. These would appear on electrical plans or fire safety plans, not plumbing plans, and would have different symbol designations.
Option D: Condensate outlet
Condensate outlets, while related to plumbing in HVAC applications, are not commonly abbreviated as 'CO' on plans. Condensate drains typically have their own specific symbols and would be more clearly labeled to distinguish them from other drainage components.
Memory Technique
CO = Clean Out - imagine a plumber saying 'Clean Out the pipes!' The 'CO' symbol marks where they can access the system to do exactly that.
Reference Hint
Florida Building Code - Plumbing, Chapter 7 (Sanitary Drainage) covers cleanout requirements and placement specifications
More Project Mgmt Questions
What is the minimum R-value required for wall insulation in Florida Climate Zone 2?
A subcontractor brings a new chemical product to your jobsite. Under the Globally Harmonized System (GHS), what information must be immediately available to workers?
A construction site has a trench that is 8 feet deep in Type B soil. What is the maximum allowable slope ratio for the trench walls without protective systems?
A detail drawing shows a scale of 3/4" = 1'-0". If a dimension measures 2.25 inches on the drawing, what is the actual dimension?
What is the maximum recommended spacing between drywall screws when attaching to wood studs?
People Also Study
Business & Financial Management
120 questions · 70% to pass
Contract Administration
60 questions · 70% to pass
Previous Question
You are planning to use a mobile crane with a 150-foot boom to lift materials to the 12th floor of a building under construction. What is the minimum distance the crane must maintain from overhead power lines carrying 50kV?
Next Question
According to the Florida Building Code, what is the minimum door width required for an accessible entrance?