According to OSHA standards, what is the minimum impact resistance requirement for safety glasses worn on construction sites?
Correct Answer
A) ANSI Z87.1
OSHA 29 CFR 1926.95 requires that safety glasses meet ANSI Z87.1 standards for impact resistance. This standard ensures adequate protection against flying particles and debris common on construction sites.
Why This Is the Correct Answer
ANSI Z87.1 is the correct standard because it specifically addresses occupational and educational personal eye and face protection devices. OSHA 29 CFR 1926.95(a) explicitly requires that protective eye and face equipment comply with ANSI Z87.1 standards for impact resistance. This standard establishes the minimum requirements for safety glasses to protect against high-velocity impact from flying particles, which is a common hazard on construction sites.
Why the Other Options Are Wrong
Option B: ANSI Z89.1
ANSI Z89.1 is the standard for industrial head protection (hard hats), not eye protection. While hard hats are also required PPE on construction sites, this standard does not address safety glasses or impact resistance requirements for eye protection.
Option C: ANSI Z359.1
ANSI Z359.1 is the standard for fall protection and fall arrest systems, including harnesses, lanyards, and anchor points. This standard has no relation to eye protection or safety glasses impact resistance requirements.
Option D: ANSI Z535.1
ANSI Z535.1 is the standard for safety colors, which deals with the specification of colors used for safety signs and markings. This standard is completely unrelated to personal protective equipment or impact resistance testing for safety glasses.
Memory Technique
Use the mnemonic 'Z87 = Eyes' and remember that all the Z-standards have different purposes: Z87 (eyes), Z89 (head), Z359 (fall protection), Z535 (colors). Focus on the '87' number association with eye protection.
Reference Hint
OSHA Construction Standards 29 CFR 1926, Subpart E - Personal Protective and Life Saving Equipment, Section 1926.95
More Project Mgmt Questions
What is the minimum R-value required for wall insulation in Florida Climate Zone 2?
A subcontractor brings a new chemical product to your jobsite. Under the Globally Harmonized System (GHS), what information must be immediately available to workers?
A construction site has a trench that is 8 feet deep in Type B soil. What is the maximum allowable slope ratio for the trench walls without protective systems?
A detail drawing shows a scale of 3/4" = 1'-0". If a dimension measures 2.25 inches on the drawing, what is the actual dimension?
What is the maximum recommended spacing between drywall screws when attaching to wood studs?
People Also Study
Business & Financial Management
120 questions · 70% to pass
Contract Administration
60 questions · 70% to pass
Previous Question
A concrete slab measures 30 feet by 40 feet with a thickness of 6 inches. How many cubic yards of concrete are needed?
Next Question
A 2x10 Southern Pine joist spans 14 feet and supports a live load of 40 psf. According to span tables, what is the maximum allowable spacing for these joists?